Journal
SCIENTIFIC AND TECHNICAL JOURNAL OF INFORMATION TECHNOLOGIES, MECHANICS AND OPTICS
UDK
Issue:4 (98)
FINITE ELEMENT FOR STRESS-STRAIN STATE MODELING OF TWO-LAYERED AXIALLY SYMMETRIC SHELLS
Annotation
Subject of Research. Computation of composite material designs requires application of numerical methods. The finiteelement method usage is connected with surface approximation problems. Application of volumetric and laminar elements leads to systems with large sizes and a great amount of computation. The objective of this paper is to present an equivalent two-layer mathematical model for evaluation of displacements and stresses of cross-ply laminated cone shells subjected to uniformly distributed load. An axially symmetric element for shell problems is described. Method. Axially symmetric finite element is proposed to be applied in calculations with use of correlation for the inner work of each layer separately. It gives the possibility to take into account geometric and physical nonlinearities and non-uniformity in the layers of the shell. Discrete mathematical model is created on the base of the finite-element method with the use of possible motions principle and Kirchhoff–Love assumptions. Hermite element is chosen as a finite one. Cone shell deflection is considered as the quantity sought for. Main Results. One-layered and two-layered cone shells have been considered for proposed mathematical model verification with known analytical and numerical analytical solutions, respectively. The axial displacements of the two-layered cone are measured with an error not exceeding 5.4 % for the number of finite elements equal to 30. The proposed mathematical model requires fewer nodes to define the finite element meshing of the system and much less computation time. Thereby time for finding solution decreases considerably. Practical Relevance. Proposed model is applicable for computation of multilayered designs under axially symmetric loads: composite high-pressure bottles, cylinder shaped fiberglass pipes, reservoirs for explosives and flammable materials, oil and gas storage tanks.
Keywords
Постоянный URL
Articles in current issue
- A METHODOLOGY FOR DESIGN SPACE EXPLORATION OF REAL-TIME LOCATION SYSTEMS
- FIBER OPTIC SENSOR MODIFIED BY GRAFTING OF THE MOLECULARLY IMPRINTED POLYMER FOR THE DETECTION OF AMMONIUM IN AQUEOUS MEDIA
- PREPARATION AND CHARACTERIZATION OF STRONTIUM FLUORIDE POWDERS ACTIVATED BY NEODYMIUM FLUORIDE
- METHOD OF GROUP OBJECTS FORMING FOR SPACE-BASED REMOTE SENSING OF THE EARTH
- METHOD OF RADIOMETRIC DISTORTION CORRECTION OF MULTISPECTRAL DATA FOR THE EARTH REMOTE SENSING
- ASPHERICAL SURFACES APPROXIMATION IN AUTOMATED DESIGN OF OPTICAL SYSTEMS
- PHASE SHIFT INFLUENCE RESEARCH OF THE REFERENCE OSCILLATOR SIGNAL ON THE OUTPUT SIGNAL IN HOMODYNE DEMODULATION SCHEME
- TRACKING CONTROL FOR A HYDRAULIC DRIVE WITH A PRESSURE COMPENSATOR
- AN ALGORITHM OF ADAPTIVE TORQUE CONTROL IN INJECTOR INTERNAL COMBUSTION ENGINE
- ON THE SPECIFIC FEATURES OF SILICON CARBIDE HETEROPOLYTYPE EPITAXY
- PEOPLE RETRIEVAL BY MEANS OF COMPOSITE PICTURES: METHODS, SYSTEMS AND PRACTICAL DECISIONS
- DISTRIBUTED GENERATION OF COMPUTER MUSIC IN THE INTERNET OF THINGS
- APPLICATION OF MICROPHONE ARRAYS FOR DISTANT SPEECH CAPTURE
- MATRIX-VECTOR ALGORITHMS OF LOCAL POSTERIORI INFERENCE IN ALGEBRAIC BAYESIAN NETWORKS ON QUANTA PROPOSITIONS
- HARDWARE ENVIRONMENT FACTOR FOR CONTROL SIGNAL TRANSFER TO A PLANT IN THE SYNTHESIS PROBLEM OF DISCRETE SYSTEMS
- PROCESSING METHOD DEVELOPMENT OF CONTROL LOW-FREQUENCY SIGNALS FOR THE INTELLECTUAL TRAINER
- DATA TRANSLATION BETWEEN PADS AND CAM350
- INCREASE OF STABILITY AT JPEG COMPRESSION OF THE DIGITAL WATERMARKS EMBEDDED IN STILL IMAGES
- ESTIMATION OF INTRUSION DETECTION PROBABILITY BY PASSIVE INFRARED DETECTORS
- ONE-DIMENSIONAL GAS DYNAMICS PROBLEMS AND THEIR SOLUTION BASED ON HIGH-RESOLUTION FINITE DIFFERENCE SCHEMES
- MONOTONIC DERIVATIVE CORRECTION FOR CALCULATION OF SUPERSONIC FLOWS WITH SHOCK WAVES
- REMOTE SYNTHESIS AND CONTROL INFORMATION TECHNOLOGY OF SYSTEM-DYNAMIC MODELS
- ANALYSIS AND QUANTITATIVE ASSESSMENT FOR RESULTS OF EDUCATIONAL PROGRAMS APPLICATION BY MEANS OF DIAGNOSTIC TESTS
- RETRIEVAL TIME RESEARCH IN TEMPORAL KNOWLEDGE BASES WITH DYNAMIC CONTENT