CONTROL OVER GAS-LIFT OIL WELLS OPERATION UNDER PARAMETRIC UNCERTAINTY CONDITION
Annotation
A solution to the problem of robust control over gas-lifted oil wells operation is proposed. The described solution is suitable for parametric uncertainty, unknown initial conditions, and necessity of output signal (volume flow at the well outlet) measurement. The model of the process is represented by ordinary differential equations derived from the Navier-Stokes equations using the straight lines approximation. The control signal is variation of flow rate of the gas supplied to the well. A modified back-stepping algorithm is used for control algorithm synthesis. Implementation of a single filter for the system condition by the control signal and straightforward control laws obtained using real differentiating element, allow to simplify the calculations and implementation of the control system. The trajectory which is a solution to linear-quadratic model problem is taken as a standard action Simulation results are presented to demonstrate the effectiveness of the proposed scheme which is robust to parametric perturbations caused by variations of physical and chemical parameters of the process.
Keywords
Постоянный URL
Articles in current issue
- COMPARATIVE ANALYSIS OF CHARACTERISTICS OF COMPLEX AND ANALYTICAL SIGNALS
- SIGNAL PROCESSING OF SATELLITE NAVIGATION SYSTEMS WITH QUADRATURE MULTIPLEXING AND FREQUENCY DIVISION
- METHOD OF ATMOSPHERIC MODEL REFINEMENT FOR BALLISTIC SUPPORT OF ROCKET-CARRIER LAUNCHES
- STOCHASTIC FILTERING FOR INTER-SATELLITE MEASUREMENTS IN GREAT-CIRCLE TRAJECTORIES
- DATA TRANSLATION BETWEEN EDA AND MCAD SYSTEMS
- STATIONARY AMPLIFICATION REGIME OF POWER BIPOLAR TRANSISTOR MODULES
- IMPACT OF ATMOSPHERIC TURBULENCE ON POTENTIAL ACCURACY OF PULSED LASER RANGEFINDER
- PREVENTION OF IMAGE TILT IN PLANE MIRROR OPTICAL SYSTEMS
- MEASURING DEGREE OF BLACKNESS OF SAMPLE SURFACE BY THE MONOTONIC HEATING METHOD
- DEPENDENCE OF THERMAL CONDUCTIVITY OF SILICONE-BASED COMPOSITE ON VOLUME CONCENTRATION OF BORON NITRIDE
- AUTOMATION OF THE ITSM-1 INSTRUMENT FOR MEASURING THERMAL CONDUCTIVITY OF CONSTRUCTION MATERIALS
- CURRENT GAIN FOR A COMPOSITE BIPOLAR TRANSISTOR WITH ADDITIONAL SYMMETRY