![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
MODELING OF HIGH-POWER VOLTAGE-INCREASING TRANSDUCERS
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
Main stages of modeling a high-power DC-DC converter are considered. The investigated transducer has supply voltage varying in the range 175-320 V, and the output voltage of 610 V; it consists of a bridge inverter raising a high-frequency transformer and a diode rectifier loaded on a capacitive filter and an active load. The presence of the transformer leakage inductance makes it possible to provide soft commutation of power switches. A nonlinear model of the converter is constructed with the use of the SimLower Simulink extension package of the MatLab system, main stages of the model synthesis are presented. The main problems that can arise in the simulation and transition from the theoretical study of a high-power converter to experimental design are indicated. The main parameters of the nonlinear model are chosen, and their effect on the energy loss is analyzed. A comparative analysis of the characteristics obtained in the simulation and the characteristics of the real device is carried out.
Keywords
Постоянный URL
Articles in current issue
- ESTIMATION OF TIME CHARACTERISTICS OF CORPORATE COMPUTER NETWORKS FUNCTIONING
- ANALYSIS OF SENSITIVITY OF CONTINUOUS SYSTEMS WITH CONSECUTIVE COMPENSATOR INCLUDED ACCORDING TO THE SMITH SCHEME TO ORDINARY PARAMETERS VARIATIONS
- MODAL CONTROL OF SYSTEMS UNDER CONDITIONS OF LIMITED INTERVALS OF PARAMETERS
- METHOD FOR CALCULATING CHARACTERISTICS OF RADIAL CLUSTER WITH VARIABLE TRANSITIONS
- METHOD OF ORGANIZING SYSTEMS OF FUNCTIONAL CONTROL OF COMBINATION LOGIC SCHEMES BASED ON MODULE-WEIGHTED BERGER CODES
- FORMATION SEQUENCES OF GORDON — MILLS — WELCH WITH PERIOD N = 511
- ESTIMATION OF FOURIER COEFFICIENTS ERRORS WHEN USING THE QUICK SPECTRAL ANALYSIS METHOD
- COMPARATIVE ANALYSIS OF RESOLUTION MEASUREMENT METHODS FOR THE OPTOELECTRONIC SYSTEMS
- METHOD FOR ELIMINATING THE ERRORS OF LONGITUDINAL COMPONENT OF THE SPECKLE STRUCTURE WHEN OPERATING MICHELSON INTERFEROMETER
- COMPUTER VISION THERAPY