THERMOELECTRIC COOLING MODULE WITH DAMPING CONDUCTOR ON COLD SPAYS
Annotation
Subject of Research.The paper presents results of study on a thermoelectric cooling module with damping heat and electrically conductive material for cold junctions. Telluride obtained by synthesis in a melting furnace is used as a thermoelectric element material. The size of a thermoelectric element is 2.0×2.0×1.5 mm. The modules were mounted on ceramic plates made of 96% Al2O3 with dimensions of 30×30×0.89 mm. Copper coated with a layer of nickel is used as the switching bus material. Modules were attached to the board by soldering. Tin and bismuth solder paste (melting point is equal to 139°С) was used as an assembly solder alloy. An electrically conductive EX-A302L silicone with specific resistance of 0.02 Ohm/cm, densityof 3.7 g/cm3 and thermal conductivity of 2.1 W/(m·K) was used for the damping compound. Methods. For efficiency increase of a thermal contact of a thermoelectric module, associated with large temperature gradient between hot and cold energy, especially for electrical n-elements, it is recommended to use an elastic electrically conductive adhesive. Elastic conductive adhesive based on silicone is proposed. Conductive silicone EX-A302L adhesive sealant consisted of single-component cold-vulcanized silicone with splashes of conductive microgranules. Working temperature from -50 to +120°C allows for the application of this adhesive both for conventional refrigeration modules, and for the cold junction of medium-temperature modules. A phased module assembly technology is developed. Main Results. Comparative tests are carried out for the experimental thermoelectric module and the standard industrial module of TB-31-2.0-1.5 thermoelectric module at measuring installations manufactured by Kryotherm company. The integrity of the modules was tested on Testo thermal imager. It is established that the difference between the working characteristics of experimental and industrial modules does not exceed 10% and lies within the permissible limits. It is found out that destruction dynamics of the modules after temperature cycling is virtually the same. Practical Relevance. The results obtained demonstrate the application possibility of electrically conductive adhesive as a contact layer for a thermoelement. The proposed technology will allow for replacing the materials of thermoelectric module branches with more efficient ones, but having different coefficients of temperature expansion, thereby increasing the efficiency of the thermoelectric device.
Keywords
Постоянный URL
Articles in current issue
- RESONANT AND NON-RESONANT INTERACTION OF SEMICONDUCTOR NANOCRYSTALS WITH LOCALIZED PLASMONS
- LIGHT PROPAGATION IN PLANAR TOTAL INTERNAL REFLECTION WAVEGUIDE WITH QUANTUM WELL
- DETECTION OF DIABETES MELLITUS TYPE II BY INFRARED SPECTROSCOPY AND MULTIVARIATE ANALYSIS
- MULTI-ROTOR UNMANNED AERIAL VEHICLE CONTROL SYSTEM BASED ON HYBRID NEUROREGULATOR
- STABILITY OF NONLINEAR DYNAMICAL SYSTEM MOTION UNDER CONSTANTLY ACTING PERTURBATIONS
- SPECTRAL AND LUMINESCENT PROPERTIES OF GLASSES DOPED WITH ERBIUM IONS BASED ON 98MgCaSrBaYAl2F14-2Ва(РО3)2
- COMPLEX RESEARCH OF E.coli VITAL ACTIVITY DYNAMICS IN PRESENCE OF TRANSITION METAL IONS
- CHEMICAL MECHANICAL POLISHING OF NONLINEAR OPTICAL ORGANIC CO-CRYSTALS BASED ON AMINOPYRIDINE SERIES
- MICROSTRUCTURE RESEARCH OF FLOAT-TYPE GYRO ROTORS BY SCANNING ELECTRON MICROSCOPE
- APPLICATION OF DIGITAL FACIAL ANTHROPOMETRY (Review paper)
- MODEL OF MULTI-LEVEL DATA STORAGE SYSTEM
- ORTHOGONAL NOISE-LIKE SIGNAL SYMBOLS FOR BROADBAND CHANNEL PROTECTION
- RATIONAL SELECTION OF WORK PERFORMERS FOR INFORMATION SYSTEM DESIGN PROJECTS
- CRITERIA FOR TEXT CONFORMITY TO SCIENTIFIC STYLE
- HIGH-LEVEL SYNTHESIS SYSTEM BASED ON HYBRID RECONFIGURABLE MICROARCHITECTURE
- CONTROL METHODS FOR UPPER EXTREMITY PROSTHESES
- SIGNAL FILTRATION ALGORITHMS FOR ULTRASONIC SENSORS IN OBSTACLE DETECTION DEVICES
- TRANSFER LEARNING FOR IMAGE CLASSIFICATION OF PRIMARY MORPHOLOGICAL ELEMENTS OF SKIN LESIONS
- RELATIVE ORDER OF SAMPLED LINEAR TIME-INVARIANT SYSTEMS
- PARAMETRIC IDENTIFICATION OF SHIP MODEL BY SYMMETRIC MOTIONS AROUND ROLL ANGLE WITH TAUTWIRE REFERENCE POSITION SENSOR
- STUDY OF ELECTROMAGNETIC TORQUE PULSATIONS IN PRECISION SERVO DRIVES WITH SINUSOIDAL PULSE-WIDTH MODULATION
- ULTRAVIOLET SPECTROPHOTOMETRIC METHOD AND WATER HYDROCARBON IMPURITY SENSOR
- HOLOGRAPHIC RECORDING IN PHOTOPOLYMERIZED NANOCOMPOSITE WITH DAST NANOCRYSTALS
- FLUORESCENCE ENHANCEMENT OF SCANDIUM COMPOUNDS WITH2-NAPHTHOYLTRIFLUOROACETONE IN WATER SOLUTION
- PROGRAM CODE OPTIMIZATION OF RELACY RACE DETECTOR LIBRARY