ABSORPTION CHARACTERISTICS OF SILVER ION-EXCHANGED LAYERS IN CHLORIDE PHOTO-THERMO-REFRACTIVE GLASS
Annotation
Subject of Research. The paper considers effect of chloride in composition of photo-thermo-refractive glass on the spectral properties of silver nanoparticles formed in ion-exchanged layers after heat treatment. Method. Glasses based on Na2O–ZnO–Al2O3–SiO2–F doped with antimony oxide Sb2O3, cerium oxide CeО2 and a variable chloride content (0–1 mol%) were synthesized for the study. Silver ions were introduced by the low-temperature Na+–Ag+ ion exchange method into the synthesized glasses. For this purpose, glass samples were immersed in a mixture of 0.1AgNO3/99.9NaNO3 (mol%) nitrates at the temperature of 320 °С for 15 minutes. After the ion exchange glasses were irradiated with ultraviolet radiation and heat-treated at the temperature of 500 °C for 3 hours to achieve the growth of silver nanoparticles. Main Results. Spectrum properties of chloride photo-thermo-refractive glasses with silver nanoparticles in ion-exchanged layers are studied. It is found that the presence of chloride in the photo-thermo-refractive glass matrix results in a long-wavelength shift of the absorption band of silver nanoparticles. That may be attributed to the growth of the mixed AgCl/NaCl shell on silver nanoparticles. The formation of silver nanoparticles in ion-exchanged layers occurs both in the irradiated and unirradiated regions of the glass. Practical Relevance. The results can be used to create Bragg gratings inside photo-thermo-refractive glass for input and output radiation (pump and signal) into the waveguide structures formed by the ion exchange method, and to create monolithic integrated optical elements on a single substrate, that is very essential for integrated optics
Keywords
Постоянный URL
Articles in current issue
- READER’S NOTE
- BLOCKCHAIN TECHNOLOGY IN 5G NETWORKS
- LASER HEATING NUMERICAL SIMULATION OF TITANIUM-CONTAINING OPTOTHERMAL FIBER CONVERTER AND VEIN WALL DURING ENDOVASALLASER COAGULATION
- EXPERIMENTAL STUDY OF OPTICAL POWER EFFECT ON THE STRUCTURE OF FIBER-OPTICAL DIFFUSER OBTAINED BY FIBER CORE MELTING
- METHODS OF HOT WIRE CREATION FOR FIBER-OPTICAL THERMAL ANEMOMETER
- EFFECT OF EXTERNAL RELATIVE PRESSURE ON PHASE SHIFT IN SAGNAC INTERFEROMETER
- ERBIUM SPECTRAL-LUMINESCENT CHARACTERISTICS IN BROMIDE-FLUORIDE PHOTO-THERMO-REFRACTIVE GLASSES
- AUTOMATED HANDDETECTION METHOD FOR TASKS OF GESTURE RECOGNITION IN HUMAN-MACHINE INTERFACES
- MODERN APPROACHES TO MULTICLASS INTENT CLASSIFICATION BASED ON PRE-TRAINED TRANSFORMERS
- EFFECTIVE IMPLEMENTATION OF MODERN MCELIECE CRYPTOSYSTEM ON GENERALIZED (L,G)-CODES
- NORMALIZATION OF KAZAKH LANGUAGE WORDS
- IMAGE-BASED DEFECT ANALYSIS FOR 3D-PRINTED ITEM SURFACE USING MACHINE LEARNING METHODS
- MODEL OF AUTOMATED SYNTHESIS TOOL FOR HARDWARE ACCELERATORS OF CONVOLUTIONAL NEURAL NETWORKS FORPROGRAMMABLE LOGIC DEVICES
- PACKET RESERVATIONS IN REAL-TIME MULTIPATH TRANSMISSIONS
- MODULAR APPROACH APPLICATION IN DEVELOPMENT OF COMPUTER NUMERICAL CONTROL SOFTWARE
- PARAMETRIC IDENTIFICATION OF DIFFERENTIAL-DIFFERENCE MODELS OF HEAT TRANSFER IN ONE-DIMENSIONAL BODIES BASED ON KALMAN FILTER ALGORITHMS
- SELECTION OF COMPOSITE MATERIAL IN ELECTROMAGNETIC LOG SENSOR
- MODELING OF LIQUEFIED NATURAL GAS EVAPORATION IN MOBILE RESERVOIRS
- MATHEMATICAL MODEL OF LIQUEFIED NATURAL GAS EVAPORATION AND ANALYSIS OF ORIGINAL COMPOSITION EFFECT ON EVAPORATION SPEED
- MESHLESS MODELING OF ELASTIC DEFORMATIONS OF POLYMERIC COMPOSITE MATERIALS UNDER STATIC LOADING
ACCURACY INCREASE OF SOFTWARE AND HARDWARE APPLIANCE FOR MUSCLE ACTIVITY MEASURING AND MONITORING BY FILTRATION OF CARRIER COMPONENT AND FREQUENCIES HIGHER THAN MEASURED SIGNAL RANGE