Mathematical simulation of effective resistance forces during cutting of chilled food products
Annotation
The relevance of the research of the cutting process of chilled food products has been shown. The muscle tissue of the chilled raw material has been described by the Maxwell-Thomson rheological model. The formulation and solution of the problem of mathematical modeling of the effective resistances forces have been completed. The muscle filaments of the product during cutting are interpreted as viscoelastic beams. The bending and tensile strains of the filaments under the influence of the knifepoint have been considered. Expressions for the dimensional and dimensionless forces of effective resistance have been obtained. The dependences of the indicated forces on the cutting edge sharpness, the half angle of knife sharpening, the rheological parameters of the material, the design parameters of the cutting body,and the operating characteristics of the cutting process have been investigated. It is shown that the nature of the dependence of the effective resistance forces on the blade sharpness is determined by the rheological state of the chilled raw material due to a change in the type of fiber deformation upon destruction. With the values of dimensionless sharpness of the knife 0.2; dimensionless cutting speed 5; measures of elasticity 5; dimensionless immersion depth of the knife 1; dimensionless half the width of the deformable layer of 0.4; dimensionless layer thickness 0.01; half angle of knife sharpening 5º; 25º; 35º; 45º, the value of the dimensionless effective resistance force is 4.91; 4.49; 3.88; and 3.07, respectively. With the values of dimensionless sharpness of the knife 0.2; half angle of knife sharpening 20º; dimensionless cutting speed 5; dimensionless immersion depth of the knife 1; dimensionless half the width of the deformable layer of 0.4; dimensionless layer thickness 0.01; elasticity measures 3; 5; 8; 12, the dimensionless force value is 3.16; 4.70; 7.91; and 10.09, respectively.
Keywords
Постоянный URL
Articles in current issue
- Complexonate water treatment in small water circulation cooling systems
- Comparative analysis of competing variants for the basic technological scheme of the liquefied methane cooling system for refueling the launch vehicle with underheated methane of increased density
- Evaluation technique for the efficiency of the exhaust air heat recovery systems
- Experimental study of linear heat pipes thermal characteristics under the external vibrations effect
- A method for the calculation of parameters for vacuum evaporation unit to make binary ice by means of drop crystallization
- Assessment of the biopotential of wild buckthorn and prospects of its integrated use
- The effect of must enzyme treatment on phenolics content in natural and alcoholized cherry juice and its stability
- The effect of freezing on the technological properties of milk
- The technology of separate grain refining, electro-hydraulic grain milling, and electro contact baking of bakery products
- Numerical investigation of heat transfer and aerodynamics of single drop-shaped tubes
- A method for constructing the equation of state of a liquid and gas based on the Migdal phenomenological theory and the Benedek hypothesis