APPLICATION OF INDUCED MECHANICAL STRESSES IN FORMATION OF SPHERICAL SURFACES OF INTERFERENCE MIRROR SUBSTRATES
Annotation
Subject of Research. The work deals with the technique for shaping of the polished substrate surfaces for interference mirrors of gas lasers, laser gyro sensors, in particular. The main attention is paid to the manufacture of parts from optical SO-115M sitall with a given curvature of the central zone and a flat surface of the peripheral ring, designed for installation on a laser resonator monoblock body by means of an optical contact. Method. The required shaping result was achieved by grinding and polishing of products in the presence of metered local mechanical stresses applied to the membrane in the central zone of the substrate. At this, the profile parameters were monitored using phase shifting interferometry technique. The experimental results were compared with the data of mathematical modeling by applying an engineering program for finite element analysis. Main Results. The main dependences of the curvature radii of spherical surfaces obtained in the technology under consideration are specified for various values of mechanical loads and geometric parameters of membranes. Particular attention is paid to consideration of the maximum stress values in the samples and their comparison with the ultimate strength characteristics of the material. It is shown that the considered technological approach can be effective in the manufacture of substrates for interference mirrors of gas laser resonators, including sensors of laser gyroscopes. In addition, the described technology can be used to manufacture aspherical substrate surfaces. Practical Relevance. The method considered provides for increase of the optical parts processing productivity in conditions of mass production.
Keywords
Постоянный URL
Articles in current issue
SENSITIVITY VARIATION RESEARCH OF TILTED FIBER BRAGG GRATING DURING CHEMICAL ETCHING
- APLICATION FEATURES OF OPTICAL POLYMERS IN OPTICAL SYSTEMS DESIGN
- EFFECT OF PLANT EXTRACTS ON ACTIVITY OF STAPHYLOCOCCUS AUREUS BY ELECTROCHEMICAL BIOTESTING
- FAST MOTION ESTIMATION ALGORITHM FOR HEVC VIDEO CODEC
- METHOD OF JOINT CLUSTERING IN NETWORK AND CORRELATION SPACES
- CONCEPT OF DIGITAL TWINS AT LIFE CYCLE STAGES OF PRODUCTION SYSTEMS
- HYPERPARAMETER OPTIMIZATION BASED ON APRIORI AND A POSTERIORI KNOWLEDGE ABOUT CLASSIFICATION PROBLEM
- INFERRING OF REGULATORY NETWORKS FROM EXPRESSION DATA USING BAYESIAN NETWORKS
- APPLICATION OF INCREMENTAL SATISFIABILITY PROBLEM SOLVERS FOR NON-DETERMINISTIC POLYNOMIAL-TIME HARD PROBLEMS AS ILLUSTRATED BY MINIMAL BOOLEAN FORMULA SYNTHESIS PROBLEM
- DISTRIBUTION EVALUATION OF REFLECTIVE CHARACTERISTICS WITH QUASI-CONTINUOUS ULTRA-WIDEBAND PROBING SIGNAL
- ADAPTIVE PROBLEM OF EXTENDED REPRODUCTION WITH MINIMIZATION OF GENERALIZED COSTS
- PREDICTION OF REACTION CONDITIONS BY DEEP LEARNING TECHNIQUES
- MODELING OF VERTICAL LIGHT PIPES FOR DAYLIGHT ILLUMINATION OF INDOOR INDUSTRIAL BUILDINGS(in English)
- CONDITION EQUATION OF POLYMER FILAMENTS
- PREDICTION OF MECHANICAL PROPERTIES FOR ONE-DIMENSIONAL POLYMER STRUCTURES
- INDEPENDENT COMPONENT ANALYSIS FOR INITIAL APPROXIMATION DETERMINATION IN IDENTIFICATION OF ACTIVE MODULES IN BIOLOGICAL GRAPHS
- CLINICAL DECISIONSUPPORT SYSTEM WITH PROCESSING OF MULTIMODAL MEDICAL DATA FOR RADIOLOGIST EFFICIENCY IMPROVEMENT PRACTICE