![Journal of IAR](/images/mag-vest.jpg)
Spring accumulators for mechatronic drives with energy recuperation in food industry equipment
![Journal of IAR](/images/mag-vest.jpg)
Annotation
Main characteristics of the spring accumulators for mechatronic drives with energy recuperation used in the technological equipment of food industry are considered in the article. The comparative analysis of the accumulators is made, the recommendations for their use are given. The paper analyses the laws of motion resulting from the use of spring drives with energy recuperation, which are based on spring accumulators and are used in the reciprocating drives for bulk stock packing. Two examples of the spring accumulator use in a manufacturing machine for dried biscuits and in dosing apparatus are shown.
Keywords
Постоянный URL
Articles in current issue
- The effect of the internal heat-exchange surface of the cylinders in the reciprocating compressors with crank-and-rod and linear drive
- Analyzing the performance of a combined type collector for solar heating and night radiation cooling
- Thermal cycling toughness estimation of a cylinder with cryogenic filling
- The effect of intermediate pressure on the operation of a two-stage reciprocating compressor (general purpose compressor)
- Efficiency of general ventilation systems in closed parking areas
- Obtaining and using smoked composition based on the extracts of Fur-cellaria Lumbricalis red seaweed
- Water binding capacity of carrot and beet powders, and their influence on the humidity of sourdough for round cracknel products
- Selection of an alternative cryoagent to cover the thermal load in the WBC systems
- A solution of inverse heat conduction problem for investigating short liner heat pipes
- Analysis of experimental values of molecular diffusion coefficients for pure gases in water
- Scientific and Technical conference with international participation «Low temperature technology in a new paradigm of energy transition»