DETERMINING THE WAVELENGTH OF RADIATION IN AN OPTICAL FIBER
Annotation
Optical fibers are the basis of data transmission systems. However, during operation, the optical cable may be damaged, and to eliminate the damage that has occurred in the field, it is necessary to know the wavelength of optical radiation in this fiber and the radiation power for each of the wavelengths used. This determines the relevance of developing a method for recording the wavelength of radiation at the output of an optical fiber that is accessible for use in field conditions, without the use of complex and expensive equipment. A method for determining the wavelength of optical radiation propagating through an optical fiber based on the use of the fiber macrobending is proposed. An experimental setup for implementing the method is developed. It is shown that this method can be used for both singlemode and multimode optical fibers. It is established that for all the studied optical fibers, the deviation of the power values determined using the method from the real ones does not exceed 12.5 %. The results of the work can be used in fiberoptic communication systems to determine the wavelength and power of radiation propagating through an optical cable.
Keywords
Постоянный URL
Articles in current issue
- SETS OF QUINARY KASAMI-LIKE SEQUENCES FOR DIGITAL INFORMATION TRANSMISSION SYSTEMS
- EXPERIMENTAL STUDY OF CLUSTER PERFORMANCE WITH CONTAINER VIRTUALIZATION
- ANALYTICAL APPROACH TO THE STUDY OF HETEROGENEOUS MARKOV CHAINS WITH PIECEWISE CONSTANT CHANGES IN TRANSITION PROBABILITIES
- METHOD OF ESTIMATION OF PARAMETERS OF LINEAR REGRESSION MODEL WITH LINEARLY DEPENDENT ELEMENTS
- APPLICATION OF CROSS-LINKED POSITIONAL CORRECTION IN A STRAPDOWN ORIENTATION SYSTEM
- USING COUPLED MODE THEORY TO MODEL INTERMODE COUPLINGS IN CURVED WAVEGUIDES BASED ON THIN-FILM LITHIUM NIOBATE
- STUDY OF THE DYNAMIC SURFACE OF AN AIRCRAFT BY THE INTERFERENCE METHOD