METHOD FOR MEASURING THE RESISTANCE OF RESISTIVE SENSORS IN INFORMATION AND MEASURING SYSTEMS
Annotation
A method for remote measurement of resistance of resistive sensors with their two-wire connection in monitoring systems is considered. The method allows to reduce significantly the influence of line resistance and is based on processing the results of integration of the transient process of discharge of a storage capacitor shunting the sensor. Results of experimental studies of the influence of the integration time and the resistance value of resistive sensors on the measurement error are presented. Based on the research results, a model for managing the integration time is constructed, which ensures a minimum range of resistance measurement errors. The error in measuring the resistance of resistive sensors is estimated. It is shown that the presented solution is more efficient than the alternative option for processing measurement results. The advantage of the proposed solution is simplification of communications and switches with a measurement error comparable to the error of systems with three- and four-wire sensor connections. The proposed measurement method can be used in multichannel systems for measuring parameters of objects and environments, in particular, temperature.
Keywords
Постоянный URL
Articles in current issue
- FORWARD AND INVERSE TASKS FOR INFERENCE RATE ESTIMATION IN BINARY NEURAL NETWORKS
- CONTROL OF A GROUND-BASED WHEELED GYROSTABILIZER AS A CARRIER OF EQUIPMENT FOR OPTICAL MONITORING OF DEFECTS IN THE OUTER SURFACE OF AN AIRCRAFT
- DETERMINATION OF ELASTIC CHARACTERISTICS OF THE PRIMARY TRANSDUCER OF THE PRESSURE SENSOR IN THE AIR SIGNAL SYSTEM
- METHODS FOR SOLVING ASTRONAVIGATION PROBLEMS USING DIGITAL OPTICAL CAMERAS
- APPLICATION OF CHALCOGENIDE GLASS IN DUAL-LENS THERMAL IMAGING OBJECTIVES
- APPLICATION OF ADDITIVE TECHNOLOGIES IN THE PREPARATION OF SHEET STAMPING PRODUCTION
- CONSTRUCTION ANALYSIS AND DESIGN METHODOLOGY OF POLYMER PARTS OF LASER HEAD HOUSINGS
- SINGULARITY ANALYSIS OF A ROBOTIC MANIPULATOR WITH SIX DEGREES OF FREEDOM USING MATLAB