Journal
Scientific and technical journal of information technologies, mechanics and optics
UDK541.183.2.678
Issue:5 (87)
Download PDF0 Kbyte
THE EFFECT OF FULLERENE C60 ON THE MECHANICAL BEHAVIOR OF EPOXY RESIN
Annotation
Fullerene C60 / epoxy polymers nanocomposites with different C60 loading (0.01-0.12 wt.%) have been prepared. Mechanical testing shows that mechanical and toughening properties of composites are greatly improved. The addition of fullerene C60 increased the modulus of elasticity and (up to 20%) and shock resistance nearly three times, but the glass transition temperature was unaffected. The measured shock resistance was also increased, from 38 to 115 kJ/m2 with the addition of 0.12wt.% of fullerene C60. The toughening mechanism has been discussed. With the dielectric spectroscopy it is shown that the destruction mechanism changes are caused by the growth of intermolecular interactions of nanoparticle - matrix and, as a result, retardation of the molecular chains mobility in the polymer matrix.
Keywords
Постоянный URL
Articles in current issue
- OPTICAL SOLITONS IN TWO-LEVEL ATOMS MEDIA
- DIELECTRIC OPTICAL NANOANTENNAS
- MODE CONTROL FOR SYSTEM OF COUPLED SPLIT-RING RESONATORS BY MEANS OF LIGHT
- BAND-GAP STRUCTURE ANALYSIS OF PHOTONIC CRYSTAL WITH MULTIPLE OPTICAL LAYERS LENGTHS FOR TERAHERTZ FREQUENCY RANGE
- OPTICAL AND OPTICAL ELECTRONIC SYSTEMS. OPTICAL TECHNOLOGIES LABORATORY SPECTROPHOTOMETER FOR VISIBLE SPECTRAL REGION
- SELECTION AND CALCULATION OF OPTOELECTRONIC SYSTEM ITEMS WITH OPTICAL EQUISIGNAL ZONE FOR VERTICAL TEMPERATURE GRADIENT MEASUREMENT OF THE AIR PATH
- DYNAMIC VISUAL ACUITY EXPERIMENTAL DETERMINATION
- PARAMETERS CALCULATION OF OPTICAL FILTER WITH ANGULAR SELECTIVE LIGHT TRANSMISSION
- CROSSTALK COMPUTER SIMULATION IN THE INFORMATION-MEASURING FIBER OPTICAL DEVICE
- OPTICAL CHARACTERISTICS DEFINITION OF OPTICAL TECHNOLOGY SURFACE ELEMENTS FOR THEIR OPTICAL CONNECTIONS
- APLANATIC MENISCUS OPTICAL ENGINEERING
- CHARACTERISTICS CHANGE OF UV LIGHT EMITTING DIODE CHIP-ON-BOARD ASSEMBLIES AT LONG WORKING TIME ON NOMINAL CURRENT
- HYDRAULIC DRIVE CONTROL SYSTEM WITH A STATIC NONLINEARITY COMPENSATION
- MATHEMATICAL MODEL AND SIMULATION ALGORITHM OF THE MULTI-TIERED MECHANICAL SYSTEM
- NON-LINEAR MASS-SPRING SYSTEM FOR LARGE SOFT TISSUE DEFORMATIONS MODELING
- DEPENDENCE OF THE PIEZOELECTRIC TRANSDUCER REACTANCE ON THE MECHANICAL PARAMETERS OF ITS LOAD
- ON DISTORTION ASSESSMENT OF IMAGES MASKING WITH M-MATRICES
- ADAPTIVE SKIN DETECTOR DEVELOPMENT
- ANAPHORIC RELATIONS IDENTIFICATION BY AUTOMATIC TEXT ANALYSIS
- SOFTWARE FOR ELEMENTARY PETRI NETS TOPOLOGY AND CLASSIFICATION STUDYING BY THEIR HOMOLOGY GROUPS CALCULATION
- AUTOMATIC SEARCH OF LOCAL VARIABLES AND ARGUMENTS OF PROCEDURES IN EXECUTABLE CODE DURING COMPUTATIONAL PROCESS VERIFICATION STAGE
- INFORMATION SYSTEMS INTEGRATION ON THE BASE OF LINKED DATA TECHNOLOGY
- HUMAN LOWER LIMBS INVESTIGATION DURING WALKING BY MEANS OF INERTIAL MOTION CAPTURE TECHNOLOGIES
- PHOTOCHEMICALLY INDUCED LUMINESCENCE POLARIZATION OF CdSe/ZnS QUANTUM RODS IN POROUS MATRIX
- WELDS QUALITY CONTROL DURING WELDING BY MEANS OF ACOUSTIC EMISSION
- VULNERABILITY ANALYSIS OF ROBOTIC SYSTEMS WITH SWARM INTELLIGENCE
- A METHOD FOR INTEGRATED ASSESSMENT AND ANALYSIS OF REGIONAL SOCIOECONOMIC SYSTEM GLOBAL SECURITY BASED ON COGNITIVE MODELING
- EXPERIMENTAL LEARNING METHOD OF SPRING PENDULUM DAMPED OSCILLATIONS ON AN INCLINED PLANE
- THE INFLUENCE OF COMPLEX FORMATION EFFECT BETWEEN POLYSILANE AND FULLERENE C60 ON THE ABSORBANCE SPECTRA AND OPTICAL LIMITING
- ON PROJECTILE AERODYNAMICS FOR A SLING
- URGENT COMPUTING FOR SCHEDULING AND DISPATCHING OF PUBLIC CONVEYANCES
- SIMULATION OF PROTEINS CONFORMATIONAL-BASED FEATURES FOR RATIONAL DRUG DESIGN BY CLAVIRE CLOUD ENVIRONMENT
- AUTOMATIC METHOD OF THE MOLECULAR MECHANICAL POTENTIALS DETERMINATION FOR COARSE-GRAINED REPRESENTATION OF THE MOLECULAR SYSTEM