CALCULATION METHOD OF THE TRANSIENT TEMPERATURES FOR MOVING SPACE OBJECT ON THE ELLIPTICAL ORBIT
Annotation
Despite the large number of publications on this subject, there are no currently analytical methods of calculation that can evaluate the temperature changes of the space object, moving on the extended elliptical orbit. Calculation method of the transient temperatures of the isothermal spherical shell space object, moving on the elliptical orbit, is suggested. It includes the calculation of time dependence of the space object altitude above the Earth based on the solution of the equation of motion on the elliptical orbit. Irradiance coefficients are calculated at each time point and are used for calculation of heat fluxes from the Earth and solar radiation reflected by the Earth and falling on the object. Then calculation of the transient heat balance is done including heat flux from the sun and average surface temperatures. Calculation results of the transient thermal condition of the space object for specific characteristics of orbit and specific heat, depending on thickness of the wall, is presented as an example. The proposed mathematical model is easy and convenient for calculations. The proposed algorithm can be extended to the other convex design configuration.
Keywords
Постоянный URL
Articles in current issue
- INFRARED TOMOGRAPHY OF HOT GAS: MATHEMATICAL MODEL OF ACTIVE-PASSIVE DIAGNOSIS
- INVESTIGATION OF OUTPUT SIGNAL AMPLITUDE DEPENDENCE IN HOMODYNE DEMODULATION SCHEME FOR PHASE FIBER-OPTIC SENSOR
- DEPENDENCE INVESTIGATION OF THE ANISOTROPIC SINGLE-MODE FIBER PARAMETERS ON A WINDING DIAMETER
- PHASE CHARACTERISTIC STABILIZATION OF THE FIBER-OPTICAL SENSOR SIGNAL IN TERMS OF TEMPERATURE CHANGE
- THERMAL INSTABILITY INFLUENCE OF THE RADIATION SOURCE CHARACTERISTICS ON THE SIGNAL OF FIBER-OPTIC GYROSCOPE
- STATISTICAL ANALYSIS OF GEOMETRICAL PARAMETERS FOR OBJECTS WITH RADIAL SYMMETRY
- COMPARISON METHODS OF STEREO VISION ALGORITHMS FOR 3D FACE RECONSTRUCTION
- ANALYSIS OF PROPERTIES FOR HIERARCHICAL IMAGE REPRESENTATION IN MODERN COMPUTER VISION SYSTEMS
- METHOD FOR DYNAMIC DATA PROCESSING IN THE SPECTRAL OPTICAL COHERENT TOMOGRAPHY WITH COMPENSATION OF DISPERSION INFLUENCE
- INTERVAL ESTIMATION SYSTEM DESIGN FOR TESTOSTERONE HORMONE DYNAMICS MODEL
- METHOD OF INTERFEROMETER SIGNAL PHASE MEASUREMENT
- ERRORS MODELING OF GRAVITY METER GYROSTABILIZER WITH THE FIBER-OPTIC GYROSCOPES
- TYPIFICATION TOOLS AND PRAGMATICS OF ORG-MASTER MODELING LANGUAGE
- NEW APPROACH FOR TEMPERATURE MEASUREMENTS OF FIELD PROGRAMMABLE GATE ARRAYS LOCAL AREA BASED ON THE MONTE-CARLO METHOD
- DESIGN PRINCIPLES OF A COMBINED NETWORK TOPOLOGY FOR ADVANCED ON-BOARD COMPUTING SYSTEM
- PRINCIPLES OF FUNCTIONAL ORGANIZATION FOR GROUP OF FIELD GEOPHYSICAL DEVICES OF THE NEW GENERATION
- AGENTS INTERACTION IN INFORMATION SYSTEM FOR THE ENTERPRISE WITH THE ADAPTATION OF MECHANISMS AND USER INTERFACE
- EFFECT OF METALLIC ISLET FILMS ON AGGREGATION AND MOLECULAR ABSORPTION ENHANCEMENT OF PSEUDOISOCYANINE
- RESEARCH AND DEVELOPMENT OF LUMINESCENT NANOCOMPOSITES FOR INTEGRATED OPTICAL MICROCHIPS
- PRECISE MANIPULATION OF MICRO- AND NANOPARTICLES UNDER THE ELECTRON BEAM
- OPTICAL PROPERTIES OF PbSe QUANTUM DOTS FORMED IN FLUORINE PHOSPHATE GLASS
- SELF-ORGANIZATION OF LEAD SULFIDE QUANTUM DOTS OF DIFFERENT SIZES
- LOCAL MINIMIZATION OF THE BURED VIAS NUMBER IN THE PRINTED CIRCUIT TOPOLOGY
- FORMATION AND DISPLAY PRINCIPLES FOR AN ARRAY OF GEOINFORMATION DATA BY MEANS OF ONBOARD DISPLAY SCREEN
- SURFACE ROUGHNESS IMPACT ON THE CORROSION RESISTANCE OF THE PRODUCTS IN MECHANICAL ENGINEERING
- USERS DISTINCTION BASED ON THEIR BEHAVIOR IN THE INTERNET
- NATIONAL INNOVATIVE SYSTEM: STRUCTURE AND ROLE OF FINANCIAL COMPONENT
- IMPROVEMENT OF TRAINING PROGRAMS FOR HUMAN RESOURCE MANAGERS ON THE BASIS OF LEARNING STYLES ANALYSIS
- AUTOMATED HARDWARE-SOFTWARE SYSTEM FOR CONTROL OF EXTENDED RADIATION SOURCES
- IMPROVEMENT OF DYNAMIC TEXTURE COMPRESSION