Calculation of expulsion process of wet screw refrigeration compressor
Annotation
Calculation method for the pressurization of screw compressor, which considers features of oil-filled refrigeration compressor is given. Two stages of process when internal pressure is lower then discharge pressure is considered. Depending for calculation pressure in working space of these stages is identified. Considered compressor operation composed of medium-temperature chiller at refrigerant R717 and R404a, and composed of lower branch cascade chiller at refrigerant R23 and R744. Provides efficiency indicators, relative resistance in discharge process, relative energy loss in inflow process from discharge port depending on volume ratio. In medium-temperature chiller mode energy efficiency of screw compressor on refrigerant R717 above then on R404а, and in lower branch cascade chiller on refrigerant R744 refrigerant R23 of all volume ratios.
Keywords
Постоянный URL
Articles in current issue
- Measurement precision structures KA in the thermal vacuum conditions
- Energy efficiency and ecological safety technicians of low temperatures
- Methods for calculating the characteristics of cryogenic thermomechanical compressor
- Scientific and practical foundations of removal of application to serving absorption water-ammonia chiller
- Calculating thermal properties of helium at the saturation line with higher accuracy
- Cryogenics at the beginning of the XXIst century
- Magnetocaloric cooling systems operating near room temperature and their systematization
- Trends in the development of compressor equipment
- To calculation of thermal and moist loadings ice skating rinks Loading from radiantheat transfer
- Calculation of a liquid branch of the saturation line R218 in MATHCAD
- The equation of state developed on the basis of the analysis of the isobar heat capacity behaviour in critical area
- Improving the efficiency of chillers by improvement of traditional types of devices