INORGANIC PHOSPHORS IN GLASS BASED ON LEAD SILICATE GLASSES
Annotation
We created and synthesized luminescent composite of the "phosphor in glass" type, based on the lead-silicate matrix and fine-dispersed powder of cerium-activated yttrium-aluminum garnet crystal. Lead-silicate system (40SiO2-20PbO-(40-x) PbF2-xAlF3, x = 0-25) was chosen as the glassy matrix. Initial glass was reduced to powder (frit) for "phosphor in glass" composite with a particle size about 50 µm. Glass frit and powder of commercial YAG:Ce3+ phosphor were mixed in a ratio of 30 to 70 (wt %). Then this composite was pressed in a tablet and sintered on a quartz substrate at 823 К for 30 minutes. Thus, the plane parallel sheet for composite of the "phosphor in glass" was obtained with a diameter equal to 10 mm. For the purpose to reduce the loss of light in the presence of dispersion at a glass-phosphor boundary, optimization of glass mixture was done by adjusting the refractive index. X-ray phase and spectral-luminescent analysis of the derived composite were done. The results of these studies showed that there was no degradation of YAG: Ce powder during sintering. Dependence of luminescence intensity from temperature in the range from room temperature to 473 К was studied. It was shown, that with the phosphor in glass usage thermal quenching of luminescence was reduced in comparison with the silicone. The model of white LED was created with the "phosphor in glass" composite based on lead-silicate glasses with low temperature of vitrifying. The derived LED emits white light with a color temperature of 4370 K, and the luminous efficiency is equal to 58 lm/W. The developed luminescent composite based on the lead-silicate matrix can be used for the production of high-power white light LED.
Keywords
Постоянный URL
Articles in current issue
- ACCOUNTING OF MANY-PARTICLE INTERACTIONS IN MOLECULAR J-AGGREGATES AND NONLINEAR OPTICAL EFFECTS IN THESE SYSTEMS
- SERS OF BACTERIORHODOPSIN WITH OUT-DIFFUSED SILVER NANOISLANDS
- SOLID BODY ABLATION UNDER EXPOSURE TO ULTRA SHORT LASER PULSES: STUDY BY MOLECULAR DYNAMICS METHODS
- FUNDAMENTAL MATRIX OF LINEAR CONTINUOUS SYSTEM IN THE PROBLEM OF ESTIMATING ITS TRANSPORT DELAY
- THERMAL AND ELECTRIC FIELDS AT SPARK PLASMA SINTERING OF THERMOELECTRIC MATERIALS
- INFLUENCE OF QUARTZ CERAMICS SINGLE-STAGE PROCESSING BY GEL-FORMING WATER SOLUTIONS ON ITS STRENGTH
- INVESTIGATION OF SORPTION CHARACTERISTICS OF POLYMERIC MINERAL-FILLED COMPOSITES FOR MEDICINE
- CRYSTALLIZATION KINETICS OF POLYMERIC NANOCOMPOSITES BASED ON POLYAMIDE 12 MODIFIED BY Cr2O3 NANOPARTICLES
- IMPROVEMENT OF RECOGNITION QUALITY IN DEEP LEARNING NETWORKS BY SIMULATED ANNEALING METHOD
- EXPERIMENTAL STUDY OF FIRMWARE FOR INPUT AND EXTRACTION OF USER’S VOICE SIGNAL IN VOICE AUTHENTICATION SYSTEMS
- SYSTEMS FOR SUPPORT OF COLLABORATIVE STUDIES IN THE COLLA ENVIRONMENT BASED ON THE EVENT BUSH METHOD
- BILINGUAL MULTIMODAL SYSTEM FOR TEXT-TO-AUDIOVISUAL SPEECH AND SIGN LANGUAGE SYNTHESIS
- POLICE OFFICE MODEL IMPROVEMENT FOR SECURITY OF SWARM ROBOTIC SYSTEMS
- RELATIONAL THEORY APPLICATION FOR OPTIMAL DESIGN OF INTEGRATED CIRCUITS
- INTERVALS OPTIMIZATION OF SYSTEMS INFORMATION SECURITY INSPECTION
- ALGORITHM FOR SEMANTIC TEXT ANALYSIS BY MEANS OF BASIC SEMANTIC TEMPLATES WITH DELETION
- ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM
- SIMULATION OF PULSED BREAKDOWN IN HELIUM BY ADAPTIVE METHODS
- ON ALGORITHMS CREATION FOR STRAPDOWN STABILIZED GYROCOMPASS OPERATION BASED ON ELECTRICALLY SUSPENDED GYROSCOPE
- MODELING AND EXPERIMENTAL STUDY OF A FIBER OPTIC HYDROPHONE SENSING ELEMENT
- NEW APPROACHES TO EFFICIENCY OF MASSIVE ONLINE COURSE
- INFORMATION INFRASTRUCTURE OF THE EDUCATIONAL ENVIRONMENT WITH VIRTUAL MACHINE TECHNOLOGY
- TWO-LAYER PHASE COMPENSATING INTERFERENCE SYSTEMS
- A PROTOTYPE OF BARENTSNET PROFESSIONAL SOCIAL NETWORK FOR INFORMATION SUPPORT OF DEVELOPMENT MANAGEMENT FOR BARENTS EURO-ARCTIC REGION