The practical use of a KOMDET-M program for piston compressors structural optimization
Annotation
This article describes the main phases of volumetric machines (VM) project, points out the advantages and disadvantages of existing techniques during the calibration and special calculations. Thesoftware features of the KOMDET-M application program and mathematical model for process analysis in volumetric machines, their interconnection with a design of a target of research and assessment of the level of technical-and-economic indexes for the target of research which has been achieved at the design stage are described in detail. The possibility of using the KOMDET program is shown to identify the causes of improper volumetric machines and associated parts performance, identified in operating conditions with the valve gear structural optimization that achieves the injected gas temperature reduction, improvement of the valve plate dynamics and overall improvement of technical-and-economic indexes of volumetric machines.
Keywords
Постоянный URL
Articles in current issue
- Minichannel heat exchangers in refrigerating equipment
- Ecology and calculation of ventilation underground parking
- To leakage calculation in working part of a screw compressor
- Analysis of a thermal condition of the piston compressor stage
- Comparative assessment of annual energy consumption in the central and decentralized air conditioning systems
- Research flow regimes of two-phase refrigerant flow in horizontal pipes
- Innovative methods to improve efficiency existing types of shell-and-tube devices
- Calculation of a line of elasticity perfluoropropane in MATHCAD
- Mobile broadband dampers for vibration plate structure
- Ozone layer-safe refrigerants