CONTROL OVER RASTER IMAGE CONTRAST IN LASER MARKING: TECHNOLOGICAL PROCESS MODELLING
Annotation
A method is proposed for evaluation of conditions and variation interval for laser surface treatment parameters in laser marking of raster images on spherical electrostatic gyroscope rotors. The method makes it possible to manage the raster image contrast at retained accuracy of hundredths of a micrometer. The contrast simulation code is developed on the base of a model of contrast management process in the form of successive stages associated with the procedure of choosing the optimal approximating function. Nonparametric approximation is used at the first stage, when only the most general information on the dependence under investigation is available. At the second stage the model of the dependence is supposed to be known, a parametric approximation is performed and a quantitative indication of the model parameters is carried out. Application of the proposed model for laser marking for the general case and for a particular labeling of thin-film coating of titanium nitride is justified. A family of curves defining the contrast dependence on the laser power for various stoichiometric composition of titanium nitride TiNx (x = 0,80—1,00) is presented. Results of the practical use of the technology are presented.
Keywords
Постоянный URL
Articles in current issue
- PRIORITY DISTRIBUTION IN QUEUEING SYSTEM WITH PROBABILITY CONSTRAINTS
- RECOGNITION OF QAM-SIGNALS ON THE BASE OF WAVELET-COEFFICIENTS OF THEIR FRAME TRANSFORMS
- ERROR ESTIMATION FOR A FAST METHOD OF SPECTRAL ANALYSIS
- APPLICATION OF FACTORIAL SYSTEM TO COMBINATORIAL PROBLEMS SOLVING
- DEVELOPMENT OF EMOTION-TOLERANT INFORMATIVE INDICATORS FOR SPEECH RECOGNITION PROBLEM
- GENERATION OF GORDON—MILLS—WELCH SEQUENCES ON THE BASE OF SHIFT REGISTERS
- ANALYSIS OF DYNAMIC PROPERTIES OF THREE-MASS EXECUTIVE AXES WITH ONE AND TWO TORQUES
- PULSED CONTROL OVER CAPACITOR CAPACITANCE
- MONITORING OF OPTICAL PROPERTIES OF CARBAMIDE AQUEOUS SOLUTIONS WITH THE USE OF INDUSTRIAL REFRACTOMETRY
- EVALUATION OF TARGETING DEVICE SIGHT LINE POSITION WITH THE EXCEPTION OF OPERATOR ERROR
- CONTROL OVER RASTER IMAGE CONTRAST IN LASER MARKING: TECHNOLOGICAL PROCESS MODELLING
- THE CHOICE OF GEOMETRIC PARAMETERS OF A ROD-TOOTHED TRANSMISSION
- FIVE-LAYER QUARTER-WAVE ANTIREFLECTION COATING FOR THE VISIBLE AND NEAR INFRARED SPECTRAL RANGE
- ERROR INTRODUCED BY VERTICAL TEMPERATURE GRADIENT ALONG THE AIR PATH INTO OPERATION OF OPTICAL-ELECTRONIC SYSTEM WITH POLYCHROMATIC EQUISIGNAL ZONE