Journal
Scientific and technical journal «Priborostroenie»
UDK65.011.4; 681.7.067
Issue:7 (59)
Download PDF258 Kbyte
EXPERIENCE IN SINGLE AND SMALL BATCH PRODUCTION OF OPTICAL-MECHANICAL SYSTEMS
Annotation
The increasing role of single and small batch production of industrial products in today's global economy is noted. A number of technical solutions to reduce production time and resource costs in the manufacture of prototypes of optical-mechanical systems and their small-scale production is considered.. The efficiency of the use of diamond micromachining technology in the manufacture of prototypes of optical-mechanical systems is demonstrated. The examples of objective lenses designed and manufactured in accordance with proposed recommendations are presented.
Keywords
Постоянный URL
Articles in current issue
- ADAPTIVE CONTROL OF UNCERTAIN SYSTEMS UNDER CONDITIONS OF MEASUREMENTS WITH DYNAMIC QUANTIZER
- METHOD OF OPERATION CONTROL OVER COMBINATORY LOGIC DEVICE BASED ON 2-OUT-OF-4 CODE
- ENSURING PIEZOELECTRIC DRIVE ROBUSTNESS USING THE METHOD OF CONTROLLED RELATIVE INTERVAL FREQUENCY
- SYNTHESIS OF COMPLEX FILTER WITH SPECIFIED TRANSFER FUNCTION
- MATHEMATICAL FORMALISM FOR DIAGNOSING OF COMPLEX TECHNICAL SYSTEM
- USE OF PARETO DIAGRAM FOR ENSURING QUALITY OF INTEGRATED CIRCUIT FUNCTIONING
- OPTICAL-ELECTRONIC AUTOCOLLIMATOR FOR TWO-COORDINATE ANGULAR MEASUREMENTS
- ANALYSIS OF REFLECTION CHARACTERISTICS OF THE UNDERLYING SURFACE AT SLANT RANGE MEASUREMENT
- EVALUATION OF EFFECTIVE THERMAL CONDUCTIVITY OF BASALT-FIBER REINFORCED COMPOSITE MATERIAL BY THE METHOD OF STATIONARY THERMAL MODE
- SIMULATION OF THERMAL CONDUCTIVITY OF THREE-COMPONENT COMPOSITION
- DESIGN AND MANUFACTURING OF INJECTION MOLDING TOOLING IN SMALL-SCALE PRODUCTION
- AN INSTRUMENT FOR MEASURING Z-PARAMETERS OF PASSIVE MULTI-ELEMENT TWO-PORT NETWORKS