Application of HACCP System and Quality of Yoghurt Production in a Small and Medium Enterprise (SME) of Dairy Products in Benin Republic
Annotation
In order to provide technical support to Benin and West African sub region in agribusiness, prospective studies audit and analysis were laid on the production of three brands of yoghurt in a small and medium enterprise (SME), producer of dairy products in Benin. The HACCP (Hazard Analysis and Critical Control Points) was used to assess the degree of integration of quality processes in SMEs. The results of the diagnostic audit focused on the production chain of 3 categories of yoghurt reveal that the company is not 100% compliant with the 12 steps (E) of HACCP. Only stages E1, E3, E4, E5 and E10 are to the norm, followed bystages E9, E8, E7, E6 and E2, whose compliance is respectively 87.2; 85.85; 70.7 and 66%.For microbiological analyzes (lactic flora, coliforms, Escherichiacoli and Staphylococcusaureus), compliance is 96.29% with the criteria of the AFNOR-2009 and CODEX STAN 243-2003, for the samples(27) collected and analyzed. The yoghurt acidity value varies from0.60 to 0.88% respectively. The contents lipids showed important variation from 4.00 to 6.00g/100g. The total sugars contents vary from 9.30 to 11.60 g/100gand its calcium is from 0.11 to 0.18 g/100g of yoghurt. The control chart indicates that the total coli forms are hazards which are to be controlled.
Keywords
Постоянный URL
Articles in current issue
- Use of a probiotic yeast strain in technology of bread from wheat flour
- Аdsorption of T-2 mycotoxins hydrocolloids
- Chemical composition and antioxidant activity of hop products
- Antioxidant properties of precooked meat semi-finished product
- Optimum consortia of microorganisms in protein fermented milk prodcut
- The influence of heat source temperature on the energy efficiency of absorption bromine lithium step down thermal transformer
- Scroll compressors capacity
- Energy efficient operating modes for central air conditioning and heating systems in an integral room
- Calculated definition of heating duration of the polypropylene pipes for transportation at low temperatures
- Changing steam chamber volume in screw expander
- Electrocaloric microcooler for thermoelastic detector
- Improvement of monitoring and control based on the use of entropy potentials. Adaptation to biotechnology
- Mathematical modeling of thermostating liquid cooling process by the system of frozen ballons
- On the thermal conductivity of R32 in critical region