FIBER BRAGG GRATINGS INSCRIPTION USING TALBOT INTERFEROMETER AND KrF EXCIMER LASER SYSTEM
Annotation
An experimental setup for the fiber Bragg gratings inscription using Talbot interferometer is described. A KrF excimer laser system CL-7550 of the type “Master Oscillator – Power Amplifier” by Optosystems Ltd., Russia, with enhanced spatial and temporal coherence is applied as the UV radiation source in the experimental setup, which includes laser beam transportation optical system and Talbot interferometer. To ensure the effective recording, the laboratory setup also includes spectral width control system based on Fabry Perot interferometer, laser beam energy distribution control system, monitoring system of laser pulse energy density on the optical fiber, and control system of optical fiber to the laser beam relative position: spectral width control system, based on Fabry-Perot interferometer; laser beam energy distribution control system; monitoring system of laser pulse energy density on the optical fiber; and control system of optical fiber to the laser beam relative position. Results of type I fiber Bragg gratings inscription in single-pulse and multi-pulse modes are presented. Dependence of spectral characteristics of fiber Bragg gratings on various recording conditions are analyzed. A method for experimental investigation of optical fiber relative photo-refractivity is described.
Keywords
Постоянный URL
Articles in current issue
- USING A PRIORI INFORMATION FOR CORRECTION OF THE EVENTS STREAM MODEL IN COMPLEX SYSTEM
- SYNTHESIS OF POLYNOMIAL CONTROL LAWS FOR CONTINUOUS DYNAMIC OBJECTS
- ORGANIZATION OF FUNCTIONAL CONTROL SYSTEMS WITH TOTALLY SELF-CHECKING STRUCTURE BASED ON PARAPHASE SIGNALS COMPRESSION MODULES
- METHOD OF AIRCRAFT ROLL ANGLE MEASUREMENT BY HORIZONTALLY POLARIZED SIGNALS OF RADIO BEACON
- HARDWARE REDUCTION OF VIBRATION IN MILLING OF COMPLEX-SHAPED SURFACES
- ANALYSIS AND SYSTEMATIZATION OF 3D PRINTING DEFECTS
- USING LASER-INDUCED MICROPLASMA FOR MULTILEVEL PHASE PLATE FABRICATION
- ENERGY-EFFICIENT HETEROGENEOUS MULTIPROCESSOR HARDWARE AND SOFTWARE COMPLEX
- GENERALIZED INDICATORS OF ELECTROMAGNETIC DEVICES WITH LEVITATION ELEMENTS
- COMPARATIVE ANALYSIS OF WAYS FOR FEMTOSECOND LASER FORMATION OF OPTICAL WAVEGUIDES
- EFFICIENCY OF BRAGG GRATING INSCRIPTION BY ArF EXCIMER LASER RADIATION DEPENDING ON ORIENTATION OF BIREFRINGENCE AXIS OF ANISOTROPIC OPTICAL FIBER
- FIBER BRAGG GRATINGS INSCRIPTION USING TALBOT INTERFEROMETER AND KrF EXCIMER LASER SYSTEM
- LASER PROCESSING OF GLASSY CARBON TO OBTAIN THE EFFECTIVE EMITTING STRUCTURES