SYNTHESIS OF A SYSTEM FOR AUTOMATIC CORRECTION OF AXIAL DISPLACEMENT OF MECHATRONIC MODULE SPINNING ROTOR
Annotation
The problem of centering spatial position of a rotor in mechatronic module used in high-precision processing equipment. The known methods of eliminating the unbalance of the rotating parts of electromechanical and mechatronic devices are analyzed. The main disadvantage of the methods is found to be the principle impossibility of achieving high accuracy in eliminating radial displacement of the rotor. A new approach to the problem of stabilization of a rotating part of the mechatronic module is proposed; the method is based on an active current correction of spatial position of the rotor. Design of the electromechanical part of the device is improved by introducing into it correcting electromagnetic coils and a magnetic system to control over the spatial correction of the rotor. A functional diagram of the proposed method and results of simulations are presented. Methods of synthesis of control loops for variables of the active correction system are discussed. The conclusion is made about technical prospects of the proposed method and on the general direction of the further research.
Keywords
Постоянный URL
Articles in current issue
- FAST ESTIMATION OF CHAOTIC SIGNAL GENERATOR PARAMETERS
- ROBUST SUBOPTIMAL CONTROL OVER MULTICHANNEL OBJECTS UNDER SATURATION CONDITIONS
- RECONSTRUCTION OF FINITE-LENGTH PERIODIC DISCRETE-TIME SIGNALS WITH THE USE OF TRIGONOMETRIC INTERPOLATION
- FPGA LOGIC ELEMENT FOR IMPLEMENTATION OF DISJUNCTIVE NORMAL FORM
- NOISE LEVEL REDUCTION AT DUPLEX PASSIVE DIGITAL SYNTHESIZER OUTPUT
- THE USE OF MOBILE LONG-BASE RADIO INTERFEROMETERS TO IMPROVE STABILITY OF NAVIGATION AND TIME MEASUREMENTS
- RETRIEVAL OF NON-STATIONARY HEAT FLOW BASED ON SOLUTION OF INVERSE PROBLEMS OF HEAT CONDUCTION
- TEMPERATURE FLUCTUATIONS OF ISOTHERMAL CYLINDRICAL OBJECTS WITH STABILIZED AXIS IN CIRCULAR SOLAR-SYNCHRONIZED ORBIT
- SYNTHESIS OF A SYSTEM FOR AUTOMATIC CORRECTION OF AXIAL DISPLACEMENT OF MECHATRONIC MODULE SPINNING ROTOR
- THE USE OF ADAPTIVE PLATFORM FOR TECHNOLOGICAL EQUIPMENT IN MACHINE-TO-MACHINE INTERACTION CONDITIONS
- HARDWARE-SOFTWARE COMPLEX FOR RODS CONTROL BY MIRROR-SHADOW METHOD USING MULTIPLE REFLECTIONS
- DEVICE FOR STUDIES ON ACOUSTIC-ELASTIC CHARACTERISTICS OF THIN WIRES
- FAST-ACTING ANTI-SURGE SYSTEM OF GAS TURBINE ENGINE
- EXPERT SYSTEM FOR MODELLING DEGRADATION AND FAILURE OF COMPLEX TECHNICAL OBJECTS