OPPORTUNITY ESTIMATION OF OPTICAL METHOD APPLICATION IN PROBLEM OF KINEMATIC CHARACTERISTICS REGISTRATION OF DYNAMIC INDENTING PROCESS
Annotation
Subject of Research.A stereoscopic method of technical vision is proposed for recording the kinematic characteristics of the dynamic indentation process in determining the physico-mechanical properties of materials. The proposed method makes it possible to determine the values of the indenter motion speed with high accuracy. Method. The method is based on the use of two high-speed video cameras immovably fixed on one flat platform. Cameras allow for synchronous recording of the indentation process. The objectives and orientation of cameras in the stereo system provide intersection of the visual fields and the required depth of the image space field. Measurement of the movement speed is performed by triangulation method. The distance between the conjugate points of the recorded object on the stereo images is inversely proportional to the distance between the pair of cameras and the corresponding point of the object in the three-dimensional space. Based on the analysis of images obtained by spatially separated cameras, the coordinates of the object point are determined. Main Results. The experimental setup consisted of two high-speed monochrome camcorders Evercam 4000-32-M, rigidly fixed through stereo. Synchronous recording was kept at a speed of 4000 frames/s with a resolution of 1280 × 860 pixels. The indenter was made in the form of a steel ball with a mass of 230 g with a diameter of 38 mm and fell onto an aluminum disk 10 mm thick from a height of 310 mm. Video images from cameras were transferred to a personal computer for processing. The analysis of the obtained data was carried out in the MATLAB system with the help of a specially written software module. The sensitivity of the proposed method made it possible to determine confidently the values of the maximum approach speed of a steel ball equal to 2.39 m/s and a rebound velocity of 1.2 m/s. The random component of the method error did not exceed 2.5%. Practical Relevance. The development of this approach will enable to create high-precision sensors of dynamic indentation. The research results may be of interest to specialists involved in metrological support and non-destructive testing of materials and products in various fields of engineering and construction.
Keywords
Постоянный URL
Articles in current issue
- MODELING AND SIMULATION OF COMBUSTION AND DETONATION BY SUBCRITICAL STREAMER DISCHARGE
- ИССЛЕДОВАНИЕ ДИЭЛЕКТРИЧЕСКОЙ ПРОНИЦАЕМОСТИ БИОЛОГИЧЕСКИХ РАСТВОРОВ В ГИГАГЕРЦОВОМ ДИАПАЗОНЕ ЧАСТОТ
- SYNCHRONIZATION SIGNAL DISTORTION IN SUBCARRIER WAVE QUANTUM KEY DISTRIBUTION SYSTEMS
- SLANT RANGE MEASUREMENT BY IMPULSE LASER RANGE FINDER
- WINDING METHOD SELECTION FOR TECHNICAL IMPLEMENTATION OF FIBER OPTIC COMMUNICATION LINE FOR HIGH-SPEED OBJECT
- SENSITIVITY TEMPERATURE DEPENDENCE RESEARCH OF TV-CAMERAS BASED ON SILICON MATRIXES
- EFFECT OF FERRITE NANOCRYSTALS ON RAMAN SPECTRA OF POTASSIUM-ALUMINABORATE GLASS
- ADAPTIVE SYNCHRONIZATION IN HIDDEN BROADBAND SYSTEMS
- SIGNAL DISCREPANCY ESTIMATION IN EQUIVALENT REPRESENTATION PROBLEM OF DISCRETE SYSTEM
- FEATURE SELECTION PARALLELIZATION BASED ON PRIORITY QUEUE
- BEAMFORMING ALGORITHM FOR BASE STATION IN SENSOR NETWORK WITH ENERGY HARVESTING
- RESEARCH OF ARTIFICIAL NEURAL NETWORK APPLICABILITY FOR USER`S ONLINE HANDWRITTEN SIGNATURE VERIFICATION
- SEGMENTAL SURFACES IDENTIFICATION OF SEPARATE OBJECTS ON 2D-IMAGE IN TASKS OF THEIR MASS QUANTITY CONDITION ASSESSMENT
- STUDY OF EDGE DETECTION TECHNIQUES IN 3D IMAGE MATCHING PROBLEM
- CONVOLUTIONAL NEURAL NETWORKS FOR FACE ANTI-SPOOFING
- ONTOLOGICAL MODELING OF SEMI-STRUCTURED SUBJECT DOMAIN WITH FUZZY LOGIC APPLICATION
- SIGNAL DISCREPANCY ESTIMATION IN EQUIVALENT REPRESENTATION PROBLEM OF DISCRETE SYSTEM
- COMPARISON OF DIFFERENCE SCHEME WITH CUSTOMIZABLE DISSIPATIVE PROPERTIES AND WENO SCHEME IN THE CASE OF ONE-DIMENSIONAL GAS AND GAS-PARTICLE DYNAMICS PROBLEMS
- LIVE MIGRATION MODEL OF VIRTUAL MACHINES WITH HYBRID APPROACH
- MATHEMATICAL MODEL OF ELECTROTECHNICAL COMPLEX FOR POWER SUPPLY SYSTEM
- IDENTIFICATION METHOD FOR VESSEL HULL HYDRODYNAMIC ADDED MOMENT OF INERTIA
- METHOD OF AUTOMATIC PAUSE PLACEMENT FOR KAZAKH LANGUAGE