![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
USING SPACE-VECTOR PWM WITH VARIABLE MODULATION FREQUENCY IN MULTILEVEL INVERTERS OF PRECISION ELECTRIC DRIVE SYSTEMS
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
Pulsations of load current vector are investigated for various inverter control algorithms with the use of a mathematical model of five-level inverter. It is shown that space-vector modulation has a number of features that need to be taken into account when developing control algorithms aimed at minimization of current pulsations in a wide range of output voltage control. A disadvantage inherent in this modulation method is noted, which consists in an abrupt change in the magnitude of the current pulsations when switching from one modulation level to another, which can lead to resonance phenomena in the instrument drive. While the changes in the pulsations level of are inherent in all modulation algorithms, for sinusoidal PWM and PWM with third harmonic injection, the changes are shown to be significantly smaller and not so abrupt. Current pulsations as a function of the output voltage index are also investigated, and variable frequency modulation is shown to significantly reduce the range of variation of current vector pulsations and provide almost the same average value throughout the entire output voltage control range for all modulation algorithms. The result allows to consider the space-vector modulation as an alternative to sinusoidal PWM and PWM with third harmonic injection in a wide voltage control range. The effect of dead time on the dead zone of the inverter regulation characteristic and, as a result, on the control range of rotation velocity of the electric drive is investigated. An increase in the number of levels is shown to reduce almost proportionally the dead zone and thereby extend the control range.
Keywords
Постоянный URL
Articles in current issue
- METHOD AND ALGORITHM OF CALCULATING THE ERROR OF PREDICTION OF TIME SCALES DISCORDANCE
- PREDICTING THE EXTENT OF FUNCTIONAL OBSOLESCENCE OF INFORMATION SYSTEMS BASED ON EXTRAPOLATION OF FUZZY EXPERT ESTIMATES
- SYMMETRICAL CRYPTOGRAPHIC SYSTEM WITH A SHARED MEMORY BASED ON RECURRENT BASES IN THE TASK OF KNAPSACK PACKING
- INFORMATION SECURITY OF AUTOMATED CONTROL SYSTEMS OF TECHNOLOGICAL PROCESSES
- EXPERIMENTAL SETUP FOR MEASURING ULTRA-LOW ELECTRIC RESISTANCES
- IDENTIFICATION OF ELECTROMECHANICAL PARAMETERS OF PRECISION ELECTRIC DRIVES
- USING SPACE-VECTOR PWM WITH VARIABLE MODULATION FREQUENCY IN MULTILEVEL INVERTERS OF PRECISION ELECTRIC DRIVE SYSTEMS
- APPLICATION OF OPTICAL SENSORS IN CONTROL SYSTEMS OF TRAIN TRAFFIC
- IN VIVO STUDY OF HUMAN TOOTH ENAMEL USING COLORIMETRIC DEVICE
- SPECTRAL METHOD FOR STABLE ESTIMATING THE DISTORTION PARAMETERS IN INVERSE PROBLEM OF IMAGE RESTORATION
- OPTIMIZATION OF HEAT-ACCUMULATING SYSTEM FOR COOLING ELECTRONIC DEVICE WITH HIGH-POWER SOURCES
- CONSTRUCTION OF A MODEL OF PIEZOACTUATOR CONSIDERING THE NON-RIGIDITY OF THE BASE
- IMPROVEMENT OF AN ELECTROMECHANICAL DEVICE FOR MEASURING ROTATION ANGLE
- EXTENSION OF ZONE WITH A CONSTANT REFLECTANCE FROM SPHERICAL SURFACES OF LARGE CURVATURE