Journal
Scientific and technical journal «Priborostroenie»
UDK681.7.022.2:678.027.74:65.011.56:004.02
Issue:6 (62)
Download PDF534 Kbyte
APPLICATION OF ADDITIVE TECHNOLOGIES AND SIMULATION SYSTEMS IN THE PREPARATION OF MOLDING PRODUCTION
Annotation
A method of technological preparation of production of small series of polymer products by injec-tion molding is presented. The necessity of using systems of simulation modeling of the casting process and structured storage of data on the project in a form suitable for search for reuse is shown. Experimental results of injection molding with the use of replaceable forming parts made of composite polymer material using additive technologies are demonstrated.
Keywords
Постоянный URL
Articles in current issue
- SEMBLANCE FILTERING IN PROCESSING OF WAVE ACOUSTIC LOGGING RECORDS
- ANALYSIS OF DYNAMIC CHARACTERISTICS OF COMPLEX GRAPH STRUCTURES
- HARDWARE MEANS FOR PLANNING PROCESSORS LOAD IN MULTIPROCESSOR SYSTEMS OF CRITICAL PURPOSE
- METHOD OF PARALLEL-PIPELINE-PARALLEL PACKET COMMUTATION IN MULTIPROCESSOR
- CALCULATION OF ANGULAR RIGIDITY OF ELASTIC ELEMENT FOR MICROMECHANICAL ACCELEROMETER
- USING TIME-TO-DIGITAL CONVERTERS TO CONTROL THE CONTINUITY OF TIMELINE FOR NAVIGATION SPACECRAFT
- CORRELATION ANALYSIS OF TECHNOLOGY ON THE EXAMPLE OF SMALL-SCALE PRODUCTION OF TWO-STEP FLOATED GYROSCOPE
- FEASIBILITY OF USING A LOW-SPEED ROTATION FOR CENTRIFUGAL CASTING OF POLYMER COMPOSITE MATERIALS
- PARAMETRIC IDENTIFICATION OF A SERVO DRIVE MODEL WITH DEADTIME-TYPE NONLINEARITIES
- DYNAMIC APPROACH TO PLANNING THE MODERNIZATION OF AUTOMATED CONTROL SYSTEMS OF PRODUCTION FACILITIES