METHOD OF BALANCING THE SENSITIVE ELEMENT OF MICROMECHANICAL PENDULUM ACCELEROMETER
Annotation
A method of balancing the sensitive element of pendulum accelerometer by laser evaporation of a metal is presented. The process of adjusting the balancing load of the micromechanical accelerometer for the lower and upper positions of the sensor element in relation to the vertical is considered. A physi-cal pendulum serves as a sensitive element of the device. When using a micromechanical pendulum accelerometer as a sensor, the threshold sensitivity determines the sensitivity of the micromechanical accelerometer to the slope of the base in the field of gravity. Calculated formulas for the lower and upper positions of the pendulum are derived. For the practical implementation of this method, it is proposed to use the technology of laser evaporation of material from the surface of the balancing load.
Keywords
Постоянный URL
Articles in current issue
- ERROR DETECTION BY MODIFIED CODES WITH SUMMATION OF SINGLE DIGITS IN THE ARBITRARY MODULUS RESIDUE RING
- METHOD OF BALANCING THE SENSITIVE ELEMENT OF MICROMECHANICAL PENDULUM ACCELEROMETER
- ROLL CONTROL OF A HIGHLY MANEUVERABLE AIRCRAFT UNDER CONDITIONS OF STRUCTURAL UNCERTAINTY
- METHOD FOR CALCULATING THE ACCURACY CHARACTERISTICS OF AUTONOMOUS SYSTEM OF SPACECRAFT NAVIGATION AND ORIENTATION
- INFLUENCE OF STAND MODULE CHARACTERISTICS ON THE ERROR IN DETERMINING PARAMETERS OF VIDEO CAMERAS WITH MATRIX CMOS PHOTODETECTORS
- HARDWARE AND SOFTWARE COMPLEX TO ASSESS THE COLORED STONES RAW MATERIAL QUALITY, ITS CLASSIFICATION AND CERTIFICATION
- METHODS FOR MOUNTING CRYSTALS IN THE SILICON TRANSISTOR STRUCTURES PRODUCTION
- METHOD OF BALANCING THE SENSITIVE ELEMENT OF MICROMECHANICAL PENDULUM ACCELEROMETER
- EVALUATION OF WEAR RESISTANCE OF MATERIALS ON A FRICTION MACHINE AT DECREASING THE SPECIFIC PRESSURE ON A FLAT SAMPLE
- MINIMIZING THE ABSOLUTE HEIGHT OF A LOW-FLYING VEHICLE DUE TO VERTICAL TRACKING OF LONG-PERIOD SEA WAVES