![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
EVALUATION OF WEAR RESISTANCE OF MATERIALS ON A FRICTION MACHINE AT DECREASING THE SPECIFIC PRESSURE ON A FLAT SAMPLE
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
A method for estimating the wear resistance of materials on a friction tire is presented. The meth-od is based on the principle of embedding the disk in a flat sample and calculation of wear and specific pressure along the length of the formed chord on the top of the bar during the tests. An algorithm for cal-culating the wear resistance of materials is developed, which allows estimating linear, mass and volume wear along the length of the chord. Results of tests of samples of various materials for wear resistance, carried out with a constant load, but at variable pressure, are presented. The test conditions allow to test materials of any hardness and evaluate the relative wear resistance in a short period of time, taking as a reference a sample of one of the materials, such as steel 40.
Keywords
Постоянный URL
Articles in current issue
- ERROR DETECTION BY MODIFIED CODES WITH SUMMATION OF SINGLE DIGITS IN THE ARBITRARY MODULUS RESIDUE RING
- METHOD OF BALANCING THE SENSITIVE ELEMENT OF MICROMECHANICAL PENDULUM ACCELEROMETER
- ROLL CONTROL OF A HIGHLY MANEUVERABLE AIRCRAFT UNDER CONDITIONS OF STRUCTURAL UNCERTAINTY
- METHOD FOR CALCULATING THE ACCURACY CHARACTERISTICS OF AUTONOMOUS SYSTEM OF SPACECRAFT NAVIGATION AND ORIENTATION
- INFLUENCE OF STAND MODULE CHARACTERISTICS ON THE ERROR IN DETERMINING PARAMETERS OF VIDEO CAMERAS WITH MATRIX CMOS PHOTODETECTORS
- HARDWARE AND SOFTWARE COMPLEX TO ASSESS THE COLORED STONES RAW MATERIAL QUALITY, ITS CLASSIFICATION AND CERTIFICATION
- METHODS FOR MOUNTING CRYSTALS IN THE SILICON TRANSISTOR STRUCTURES PRODUCTION
- METHOD OF BALANCING THE SENSITIVE ELEMENT OF MICROMECHANICAL PENDULUM ACCELEROMETER
- EVALUATION OF WEAR RESISTANCE OF MATERIALS ON A FRICTION MACHINE AT DECREASING THE SPECIFIC PRESSURE ON A FLAT SAMPLE
- MINIMIZING THE ABSOLUTE HEIGHT OF A LOW-FLYING VEHICLE DUE TO VERTICAL TRACKING OF LONG-PERIOD SEA WAVES