![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
USING STANDARDS FOR DESIGN ESTIMATES OF THE KINEMATIC ERROR OF GEARS
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
A probabilistic approach is applied to determining the accuracy of a gear using the example of tangential composite deviation. Using this approach at the design stage of the mechanism increases the accuracy of predicting the gear quality characteristics. The definition of the tangential composite deviation according to GOST 1643-81 is described, and a formula for calculating the tangential composite deviation function is derived with the account for amplitudes and initial phases of its constituent terms. For probabilistic calculation of the tangential composite deviation, the method of statistical tests – the Monte Carlo method is used. The experiment results are compared with the calculation of the tangential composite Использование стандартов при оценках кинематической погрешности зубчатых передач 561 ИЗВ. ВУЗОВ. ПРИБОРОСТРОЕНИЕ. 2020. Т. 63, № 6 deviation in accordance with GOST 1643-81 for the 5th and 7th degrees of accuracy and for transfer ratios from 1 to 8. Conclusions are drawn about inaccuracies in the notes in GOST 1643 and the possibilities of using the standard.
Keywords
Постоянный URL
Articles in current issue
- EFFECT OF ERRORS IN ADJUSTMENT OF QUADRATURE CHANNELS OF A COHERENT SYSTEM ON COMPLEX SIGNAL PARAMETERS ESTIMATION
- NONLINEAR REAL-TIME PROBLEMS IN STOCHASTIC SYSTEM WITH POISSON COMPONENT
- PARAMETERS ESTIMATION OF SINUSOIDAL SIGNAL WITH POWER-LAW FREQUENCY DEPENDENCE
- SYSTEM OF INSULATION STATUS MONITORING FOR ELECTRIC DRIVES IN NETWORKS WITH A DEAD-EARTH NEUTRAL
- MODELLING ROTATIONS OF SOLAR CELLS ON A SPACE VEHICLE. ADEQUACY CHECK
- MODIFICATION OF THE METHOD OF PARAMETRIC IDENTIFICATION OF A SYNCHRONOUS MACHINE WITH PERMANENT MAGNETS
- RELIABILITY OF ADAPTIVE OPTICAL SYSTEM OF TILT CORRECTION
- AUTOMATED DESIGN OF WOODEN CONTAINERS FOR ELECTRONIC EQUIPMENT COMPLEXES
- DERIVATION OF AN ANALYTICAL SOLUTION TO THE PROBLEM OF ANALYZING A CONCENTRATED VIBRATIONAL EFFECT ON A MEMBRANE-STRIP ELEMENT
- EFFECT OF INTENSIVE PLASTIC DEFORMATION ON THE STRUCTURE AND PROPERTIES OF THE ALUMINUM ALLOY SYSTEM AL-CU-MG