MODIFICATION OF THE METHOD OF PARAMETRIC IDENTIFICATION OF A SYNCHRONOUS MACHINE WITH PERMANENT MAGNETS
Annotation
A modified method of identification of electrical parameters of a servo drive and a PWM inverter, based on the least square method, is proposed. The proposed identification method uses a model that considers the effect of “dead time” and the voltage drop on the power switches of the converter. The method accuracy is improved by separating the identification of the static transmission coefficient and the electromagnetic time constant into two stages, in each of the stages only one parameter is evaluated. The new method is shown to achieve a higher accuracy of parameter estimation compared to existing methods using a linear model of servo drive.
Keywords
Постоянный URL
Articles in current issue
- EFFECT OF ERRORS IN ADJUSTMENT OF QUADRATURE CHANNELS OF A COHERENT SYSTEM ON COMPLEX SIGNAL PARAMETERS ESTIMATION
- NONLINEAR REAL-TIME PROBLEMS IN STOCHASTIC SYSTEM WITH POISSON COMPONENT
- PARAMETERS ESTIMATION OF SINUSOIDAL SIGNAL WITH POWER-LAW FREQUENCY DEPENDENCE
- SYSTEM OF INSULATION STATUS MONITORING FOR ELECTRIC DRIVES IN NETWORKS WITH A DEAD-EARTH NEUTRAL
- MODELLING ROTATIONS OF SOLAR CELLS ON A SPACE VEHICLE. ADEQUACY CHECK
- MODIFICATION OF THE METHOD OF PARAMETRIC IDENTIFICATION OF A SYNCHRONOUS MACHINE WITH PERMANENT MAGNETS
- RELIABILITY OF ADAPTIVE OPTICAL SYSTEM OF TILT CORRECTION
- AUTOMATED DESIGN OF WOODEN CONTAINERS FOR ELECTRONIC EQUIPMENT COMPLEXES
- USING STANDARDS FOR DESIGN ESTIMATES OF THE KINEMATIC ERROR OF GEARS
- DERIVATION OF AN ANALYTICAL SOLUTION TO THE PROBLEM OF ANALYZING A CONCENTRATED VIBRATIONAL EFFECT ON A MEMBRANE-STRIP ELEMENT
- EFFECT OF INTENSIVE PLASTIC DEFORMATION ON THE STRUCTURE AND PROPERTIES OF THE ALUMINUM ALLOY SYSTEM AL-CU-MG