Journal
Scientific and technical journal «Priborostroenie»
UDK620.178.15
Issue:9 (63)
Download PDF485 Kbyte
METROLOGICAL ASPECTS OF MATERIAL HARDNESS MEASURING BY THE METHOD OF DYNAMIC INDENTING
Annotation
The problem of application of hardness measurements based on the dynamic indentation approach in the Russian Federation is reviewed. Metrological aspects of using the dynamic indentation method to control the hardness of materials are discussed. Principles of the hardness measurement method are described. Metrological support of the dynamic indentation method is considered and recommendations for the method improvement are formulated.
Keywords
Постоянный URL
Articles in current issue
- INVESTIGATION OF ONE TYPE OF ERRORS PROBABILITY IN SYSTEM DETERMINING INFORMATION PACKETS SOURCE
- CALCULATION OF A DIGITAL TRACKING SYSTEM WITH A FINITE DECAY TIME OF A FREE PROCESS. PART I. MINIMUM TRANSIENT TIME
- CALCULATION OF A DIGITAL TRACKING SYSTEM WITH A FINITE DECAY TIME OF A FREE PROCESS. PART II. TRANSITION TIME EXCEEDING MINIMUM
- CONTROL BY THE MANEUVER OF AN UNMANNED AERIAL VEHICLE WHEN LANDING ON A MOBILE PLATFORM USING THE METHOD OF "FLEXIBLE" KINEMATIC TRAJECTORIES
- STATIC AND FULL PRESSURE MEASUREMENT SYSTEM USING INITIAL SIGNAL SPLITTING AT THE SECONDARY CONVERTER INPUT
- DISC RESONATORS FOR ANGULAR VELOCITY SENSORS
- APPLICATION OF MACHINE VISION IN THE TASKS OF AUTOMATIC POSITIONING OF MODULAR EQUIPMENT TOOL
- INDUSTRIAL CYBER-PHYSICAL PLATFORM FOR SMALL SERIES PRODUCTION OF POLYMER PARTS
- OPTICAL ABSORPTION GAS ANALYZER FOR MONITORING THE MAXIMUM PERMISSIBLE CONCENTRATION OF FREONS IN THE AIR OF WORKING AND LIVING AREAS
- METHOD FOR IMPROVING THE CONTROL SYSTEM OF FUEL COMBUSTION PROCESSES IN BOILER UNITS