For example,Бобцов

R-245fa phase equilibrium line modeling method

Annotation

A critical analysis of the available information on the density  and pressure ps of the R-245fa refrigerant on the line of phase equilibrium (LPE) has been carried out and a mathematical model of LPE has been proposed that transmits this information within the limits of its uncertainty. The LPE model was developed within the framework of the Clapeyron-Clausius and Mendeleev-Clapeyron equations, the model [2β, 1 – α] of the average diameter fd:, where αand β are the critical indices; τ= T/Tc – 1, and the equation of the "apparent" heat of vaporization, developed within the framework of the large-scale theory. It is shown that in the temperature range from Tt = 171.05K to the critical temperature Tc = 427.01  K, the proposed LPE model transmits data on  and psof R-245fa within the limits of their experimental uncertainty; the RSM (Root-mean square deviation) values are given, which for the most reliable data were compiled by: Feng et al. (2010), RSM(ps) = 0,063%; Wang et al. (2004), RSM(ps) = 0,021%; Semenyuk Yu.V. et al. (2006), RSM(p+) = 0,087%. It is shown that the combined use of the parameter, the Mendeleev-Clapeyron equation and the Clapeyron equation can significantly increase the reliability of the calculated information about the density ρ–  in the vicinity of the triple point.

Keywords

Articles in current issue