![Journal of IAR](/images/mag-vest.jpg)
Methods of numerical simulating thermal deformations of working bodies for a screw single-rotor compressor
![Journal of IAR](/images/mag-vest.jpg)
Annotation
Thermal deformations can have a significant impact on the mutual arrangement of parts due to different operating temperatures, as well as on their manufacturing from different materials. These circumstances often lead to the occurrence of thermal gaps or tightness in the joints, which must be taken into account at cold assembly of nodes. A screw single-rotor compressor has gaps in its design and the surfaces of the parts forming them are subjected to thermal deformation, therefore, the development of a methodology for calculating the geometric parameters of the screw single-rotor compressor parts, taking into account their thermal deformations, is necessary for the correct operation of the screw single-rotor compressor during its operation. This technique will allow you to assign minimum safe clearances and tolerances to the working bodies of the screw single-rotor compressor at the stage of their manufacture. The article considers the gap between the end surface of the cut-off tooth and the surface of the helical groove of the central rotor screw. On the one hand, the size of the gap under consideration should compensate for the thermal deformation of the parts to protect against jamming. On the other hand, minimizing the gap should ensure the achievement of effective performance indicators of the screw single-rotor compressor, which has the greatest impact on its performance characteristics. The proposed method of numerical simulating the working process in the compressor will allow the most differentiated approach to taking into account the thermal factors affecting the energy performance of the machine.
Keywords
Постоянный URL
Articles in current issue
- Heat and mass transfer during film flow around ice surfaces with a phase transition at the interface
- Prediction of the parameters for the experimental stage of the compressor with a linear drive and a variable cylinder diameter when operating as a part of electrochemical air regeneration systems
- Model for diagnosing SKAB-7.5 on the basis of the vector for its diagnosing parameters
- Pastille technology designed to maintain the functions of cardiovascular system
- Functional and prebiotic properties of buckwheat
- Improving the design of the facilities for supply, maintenance, and storage of the drinking water under special conditions
- Raman spectroscopy for the analysis of refrigerants classified as ozone depleting substances
- The equation of state and the density for the mixture of supercritical carbon dioxide with vegetable oils
- Requirements for manuscripts in the Journal of IAR
- The International Academy of Refrigeration announces a competitive admission for 2022