METHOD OF PONDEROMOTIVE CONTROL OF MAGNETIC SUSCEPTIBILITY OF DISPERSE SAMPLES AND PARTICLES OF IRON-CONTAINING SORBENTS
Annotation
In order to increase the efficiency of using powder magnetic sorbents in water purification technology, when one of the key stages of this technology is the rapid isolation of spent sorbent by magnetic separation, the control of the magnetic susceptibility χ of the individual particles of such sorbents is needed. The analyzed methodology of determining magnetic susceptibility is based on obtaining experimental dependence of the magnetic susceptibility of the dispersed sample on the volume fraction γ in it of controlled particles and identifying the linear initial section of this dependence (limited by criterion value γ = [γ]), the specified section of this dependence indicates the practical absence of magnetic interaction of the particles. So at γ = [γ], χ -values are determined as χ = /γ. By ponderomotive method (using modernized magnetometer with spherical pole pieces for creating zone of a stable inhomogeneity field) γ -dependence of is obtained for magnetic sorbent (carbon sorbent with inclusions of magnetite and maggemite), and value of [γ] is found. The magnetic susceptibility χ of the particle in the field of strength H = 61 kA/m is determined from its linear section, up to the criterion value [γ]. It also seems possible to obtain an expanded field dependence for χ.
Keywords
Постоянный URL
Articles in current issue
- APPLICATION OF BIG DATA METHODS FOR INTERMAGNET DATA PREPROCESSING
- CONTROL OF SELF-DUAL DEVICES USING COMPRESSION CIRCUITS BASED ON FULL ADDERS
- NEW SUSTAINABLE METHODS FOR DISTORTED IMAGE RECOVERING
- FORMATION OF SETS OF TERNARY GOLD-LIKE SEQUENCES FOR DIGITAL INFORMATION TRANSMISSION AND PROCESSING SYSTEMS
- PRELIMINARY PROCESSING OF DATA FROM A SATELLITE NAVIGATION RECEIVER IN THE PROBLEM OF THREE-DIMENSIONAL UPPER IONOSPHERE TOMOGRAPHY
- EXPERIMENTAL METHODS AND MEANS OF PROTECTING SPACE-BASED OPTOELECTRONIC SYSTEMS FROM MECHANICAL IMPACTS
- REFRACTOMETRIC METHODS AND MEANS OF CONTROL OF ETHANOL, PROPANOL, AND THEIR AQUEOUS SOLUTIONS
- METHOD FOR DETERMINING THE RATIONAL MODES OF THE TECHNOLOGICAL OPERATION OF FINISHING FLAT SURFACES WITH A BONDED ABRASIVE