![Вестник МАХ](/images/mag-vest.jpg)
Modeling of working processes in low-speed reciprocating compressors of compact refrigeration units
![Вестник МАХ](/images/mag-vest.jpg)
Annotation
The paper concerns the problem of creating compact refrigerating machines in which, due to the peculiarities of the compression mode in the compressor, the load on the condenser is significantly reduced. Previous studies on carbon dioxide showed the possibility of a low-speed compressor operating in the area of wet steam during compression. The accumulated modeling experience allowed obtaining data on the temperature of the compressor wall and, for existing dependencies describing the condensation process, obtaining data on the operation of a low-speed compressor in a refrigeration machine when running on carbon dioxide. At the same time, they were obtained both with complete condensation of the working fluid and in the absence of condensation, but at temperatures close to condensation temperatures. Taking into account the specifics of the operation of low-speed compressors, namely the possibility of obtaining large values of the pressure-to-discharge pressure ratio, the integral characteristics of the compressor were obtained with a pressure ratio in the stage equal to 5.7, which showed a significant superiority in this indicator over existing compressors. Further research is aimed at conducting experimental studies and verifying the presented calculation model.
Keywords
Постоянный URL
Articles in current issue
- Energy modeling and experimental validation of heat pump operating modes in exhaust air heat recovery. Part 1. Design and analysis model
- Comparative analysis of various channel shapes for a plate-fin heat exchanger of a small-sized gas turbine power plant
- The consequences of misalignment of the spiral elements in the compressor
- Heat transfer of a radiator with spatial ordered lattice structures under conditions of free convection
- Decreasing LNG losses at handling and storage
- Design and optimiztaion of regenerator for pulse cryocooler
- Сomposition, biological value and production of protein paste from chickpeas
- Formulation and technology for cheese product "Adygeysky Cheese" with controlled fatty-acid compostion
- Scientific substantiation and development of a confectionery product recipe using a non-traditional secondary raw source
- Morphological, cultural, and biophysiochemical characteristics of microorganisms – potential producers of xylanase
- Heat and mass transfer during boiling of vegetable oil miscella in gravity flowing-down films
- Requirements for manuscripts in the Journal of IAR