Operating processes of low-flow low-speed compressors on R600a freon
Annotation
Nowadays, environmental compliance in refrigeration technology often comes to the fore. Instead of R12 freon, which is harmful to the ozone layer, R600a refrigerant is often used. The work under consideration indicates the prospect of using R600a refrigerant in single-stage refrigeration machines using a low-speed compressor. At the same time, to simulate work processes, it is necessary to clarify the calculation model. This can be done by conducting experimental studies and verifying the existing model of a low-speed compressor based on the results obtained. The results of the theoretical and natural experiments were compared, and the difference in the results did not exceed 8%.
Keywords
Постоянный URL
Articles in current issue
- Structural and parametric optimization of ducted supply and exhaust ventilation. Part 1
- Technology for environmentally friendly entry into the subglacial Lake Vostok
- Exergy analysis of a vapor compression refrigeration unit under variable operating conditions
- Directions for the development of energy saving at vacuum drying of plant materials
- Spectrometric analysis of titanium dioxide-based coating to be applied to a combined solar collector
- Comparative analysis of β-glucans received from fruit bodies and mycelium of basidiomycetes with IR-spectroscopy
- Composition and technology of a beverage based on kvass wort with low glycemic index
- Analytical foundations of ice rheology
- Thermophysical properties of sintered friction materials based on tin bronze
- Dissipative characteristics of refrigerating machines
- Vasily Yevgenyevich Evdokimov is 85 years old!
- Congratulations on the anniversary of M.D. Khanevich!
- Congratulations on the anniversary of O. B. Tsvetkov!