INTELLIGENT INFORMATION AND MEASURING SYSTEM WITH A RECONFIGURABLE STRUCTURE FOR DETERMINING THE THERMAL CONDUCTIVITY OF MATERIALS
Annotation
Modeling the process of thermophysical measurements is necessary when determining the thermal conductivity of the heat -protective coating of buildings, the industrial premises of the agro-industrial complex, industrial structures in real environmental conditions. The problem of choosing the structure of an intelligent measuring system of thermophysical properties of materials in accordance with the thermal conductivity of materials is solved. An intelligent procedure for converting modules of structural, mathematical, metrological and software support is implemented in accordance with the strategy of reconfiguring the system structure and taking into account the measurement situation, which allows automating the processes of managing thermophysical measurements to improve the accuracy of determining the thermal conductivity of materials. The use of the proposed mathematical model of measurements makes it possible to expand the intelligent system functionality, to implement prompt and accurate determination of the thermal conductivity of heat-protective coatings of objects under the influence of external destabilizing factors in conditions of uncertainty.
Keywords
Постоянный URL
Articles in current issue
- DIRECT ADAPTIVE COMPENSATION OF MULTI-SINUSOIDAL DISTURBANCES IN LINEAR SYSTEMS WITH FINITE-TIME CONTROLLER TUNING
- METHOD FOR FAULT IDENTIFYING IN NONLINEAR SYSTEMS
- LOCALIZATION OF THE PHASES OF IMPACT-FRICTION INTERACTION OF THE FOOT WITH THE SUPPORTING SURFACE
- REFLECTOR WITH A CYLINDRICAL FACE AND A NON-RIGHT ANGLE BETWEEN THE FLAT ONES FOR THREE-COORDINATE MEASUREMENTS
- REFINEMENT OF THE CALCULATION METHOD FOR AN ACHROMATIC LENS WITH AN OPERATING SPECTRAL RANGE FROM ULTRAVIOLET TO NEAR INFRARED
- FIELD STRENGTH CHARACTERISTICS IN SINGLE-LAYER AND MULTI-LAYER SOLENOIDS: BASIC AND ADAPTIVE. THE ZONE OF UNIFORMITY
- ALGORITHMS FOR AUTOMATED NON-CONTACT CONTROL OF GEOMETRIC CHARACTERISTICS AND ROUGHNESS OF PRODUCTS
- ANALYTICAL METHOD FOR CALCULATING THE THICKNESS OF PROTECTIVE MASK LAYERS IN THE MANUFACTURING OF A MICROMECHANICAL ACCELEROMETER