Journal
Scientific and technical journal «Priborostroenie»
UDK621
Issue:2 (54)
Download PDF428 Kbyte
PULSED LASER ASSISTED FORMING OF THIN SHEET METAL
Annotation
Process of laser bending of alloyed steel sheets of 0,3 to 1,1 mm thickness is analyzed. Pulse Nd:YAG laser (average rower of 200 W, pulse duration of 0,1—10 ms) is employed and programmable 6-axis robot Motoman SSF-2000 is used for formation of illuminated area of irregular-shaped details. Experimental results show that bend angle may be varied through a wide range depending on the laser-processing mode.
Keywords
Постоянный URL
Articles in current issue
- HIGH POWER LASER PROPULSION
- AN EXPERT SYSTEM FOR LASER MICROPROCESSING MODE OPTIMIZATION
- AN EXPERT SYSTEM FOR LASER MICROPROCESSING MODE OPTIMIZATION
- LASER-INDUCED SILICON SURFACE STRUCTURING FOR SOLAR CELL APPLICATION
- MODIFICATION OF PHOTOSENSITIVE GLASS-CERAMIC “FOTURAN” WITH ULTRASHORT LASER PULSES
- REDISTRIBUTION OF ELEMENTS IN STEEL LASER WELD JOINT STUDIED WITH LASERINDUCED BREAKDOWN SPECTROSCOPY
- FORMATION OF PERIODIC STRUCTURES AT THE SURFACE OF SILICATE UNDER RESONANT ACTION OF CO2 LASER IRRADIATION
- COLOR IMAGE FORMATION AT LASER OXIDATION OF METALS
- LASER-ASSISTED GRAFFITI PAINTS REMOVAL
- LASER CLEANING OF SCREENED PRINTING ROLLS
- LASER-ASSISTED RAIL CLEANING TO ENHANCE THE FRICTION COEFFICIENT
- ON FEASIBILITY OF SPECTROSCOPIC CONTROL OVER LASER CLEANING PROCESS
- APPLICATION OF LASER TECHNOLOGIES FOR ARTWORKS RESTORATION
- REMOTE TESTING OF MICROLENS WITH THE USE OF LOW-COHERENCE INTERFEROMETRY AND OPTICAL COHERENCE TOMOGRAPHY
- NEAR-FIELD MICROSCOPY WITH A LINEAR NANOPROBE SUPPORTING PLASMONS