Uniform non-analytical equation of the state of R218 satisfying the fundamental theory of critical phenomena
Annotation
An equation of the state of R218 is offered. The R218 refrigerant is applied as working medium in refrigerating equipment. The equation of state describes its thermal and caloric properties. It has been compared with other contemporary equations of state. A new crossover function was used in this work. The single-phase area showed the following standard deviations: density δρ = 0.3; isochoric heat capacity in broad vicinity of the critical point δCv = 0.8; isobaric heat capacity δCp = 2.4%; and speed of sound δw = 2.2%. This equation of state provides accurate qualitative and quantitative reproduction of thermodynamic function features both in the regular area and in the critical point’s vicinity.
Keywords
Постоянный URL
Articles in current issue
- Kinetics of diffusion processes while drying quasi-one-dimensional bodies
- Cryogenic system of a superconducting separator for the kaon channel in the IHEP accelerator
- Mathematical model of an oil-flooded rotary screw compressor with injection of working substance
- The concept of common cryogenic supply for experimental devices
- Using low temperatures for storage of biological products: two concepts of umbilical cord blood cryostorage
- Uniform non-analytical equation of the state of R218 satisfying the fundamental theory of critical phenomena
- Calculating changes of clearances between profiled surfaces of a screw compressor
- Summary of the experimental data on dielectric permittivity of water, ammonia and the refrigerants R134a and R152a
- Alternative working media for a combined heat and cold generator
- The effect of the design of an air cooling system on the shrinkage rate of stored food products
- A correlation predicting thermal conductivity of liquid halogenated hydrocarbons
- Critical currents at Josephson junctions of the superconductor-insulator-superconductor type
- Recording contact resistance between the tube surface and fin collar in tube-plate heat exchanger designs for cold supply and conditioning systems
- Effective heat conductivity of frozen disperse materials in vacuum dehydration processes *
- The effect of compressed environment on the power factors in an oil-flooded screw compressor
- Heat inflow from the “respiration” of vegetable products