Journal
SCIENTIFIC AND TECHNICAL JOURNAL OF INFORMATION TECHNOLOGIES, MECHANICS AND OPTICS
UDK
Issue:4 (98)
DATA TRANSLATION BETWEEN PADS AND CAM350
Annotation
The subject matter of the paper is the process of data translation between computer-aided design system for electronic devices PADS VX and system for technological preparation of production of printed circuit boards CAM350 10. The object of this study is two-way translation of data in these systems. Experimental researches are applied as research methods based on repeated playback of forward and reverse data translation process between PADS and CAM350 systems. The aim is to examine the challenges of data exchange between systems and to find out the ways of their solution. The basis of the work is functionality analysis of PADS and CAM350 systems while data translation, which was carried out in the course of operating experience of these systems. The paper presents advantages and disadvantages of translation methods and their comparison. Errors arising in the process are analyzed. Possible reasons of errors origination are described. The main results are recommendations for data exchange between PADS and CAM350 systems. The proposed recommendations give the possibility to optimize the exchange of data between these systems. Practical significance of the work lies in the implementation of results at LLC «Abeo». Recommendations have been used in the development of dozens of different electronic devices. The use of these results made it possible to reduce the production run-up time, to increase data transmission correctness, thereby improving the quality of products and reduction of their cost.
Keywords
Постоянный URL
Articles in current issue
- A METHODOLOGY FOR DESIGN SPACE EXPLORATION OF REAL-TIME LOCATION SYSTEMS
- FIBER OPTIC SENSOR MODIFIED BY GRAFTING OF THE MOLECULARLY IMPRINTED POLYMER FOR THE DETECTION OF AMMONIUM IN AQUEOUS MEDIA
- PREPARATION AND CHARACTERIZATION OF STRONTIUM FLUORIDE POWDERS ACTIVATED BY NEODYMIUM FLUORIDE
- METHOD OF GROUP OBJECTS FORMING FOR SPACE-BASED REMOTE SENSING OF THE EARTH
- METHOD OF RADIOMETRIC DISTORTION CORRECTION OF MULTISPECTRAL DATA FOR THE EARTH REMOTE SENSING
- ASPHERICAL SURFACES APPROXIMATION IN AUTOMATED DESIGN OF OPTICAL SYSTEMS
- PHASE SHIFT INFLUENCE RESEARCH OF THE REFERENCE OSCILLATOR SIGNAL ON THE OUTPUT SIGNAL IN HOMODYNE DEMODULATION SCHEME
- TRACKING CONTROL FOR A HYDRAULIC DRIVE WITH A PRESSURE COMPENSATOR
- AN ALGORITHM OF ADAPTIVE TORQUE CONTROL IN INJECTOR INTERNAL COMBUSTION ENGINE
- ON THE SPECIFIC FEATURES OF SILICON CARBIDE HETEROPOLYTYPE EPITAXY
- PEOPLE RETRIEVAL BY MEANS OF COMPOSITE PICTURES: METHODS, SYSTEMS AND PRACTICAL DECISIONS
- DISTRIBUTED GENERATION OF COMPUTER MUSIC IN THE INTERNET OF THINGS
- APPLICATION OF MICROPHONE ARRAYS FOR DISTANT SPEECH CAPTURE
- MATRIX-VECTOR ALGORITHMS OF LOCAL POSTERIORI INFERENCE IN ALGEBRAIC BAYESIAN NETWORKS ON QUANTA PROPOSITIONS
- HARDWARE ENVIRONMENT FACTOR FOR CONTROL SIGNAL TRANSFER TO A PLANT IN THE SYNTHESIS PROBLEM OF DISCRETE SYSTEMS
- PROCESSING METHOD DEVELOPMENT OF CONTROL LOW-FREQUENCY SIGNALS FOR THE INTELLECTUAL TRAINER
- INCREASE OF STABILITY AT JPEG COMPRESSION OF THE DIGITAL WATERMARKS EMBEDDED IN STILL IMAGES
- ESTIMATION OF INTRUSION DETECTION PROBABILITY BY PASSIVE INFRARED DETECTORS
- FINITE ELEMENT FOR STRESS-STRAIN STATE MODELING OF TWO-LAYERED AXIALLY SYMMETRIC SHELLS
- ONE-DIMENSIONAL GAS DYNAMICS PROBLEMS AND THEIR SOLUTION BASED ON HIGH-RESOLUTION FINITE DIFFERENCE SCHEMES
- MONOTONIC DERIVATIVE CORRECTION FOR CALCULATION OF SUPERSONIC FLOWS WITH SHOCK WAVES
- REMOTE SYNTHESIS AND CONTROL INFORMATION TECHNOLOGY OF SYSTEM-DYNAMIC MODELS
- ANALYSIS AND QUANTITATIVE ASSESSMENT FOR RESULTS OF EDUCATIONAL PROGRAMS APPLICATION BY MEANS OF DIAGNOSTIC TESTS
- RETRIEVAL TIME RESEARCH IN TEMPORAL KNOWLEDGE BASES WITH DYNAMIC CONTENT