SPECTRAL CHARACTERISTICS OF MID-INFRARED LIGHT-EMITTING DIODES BASED ON InAs (Sb,P)
Annotation
Subject of Study.We consider spectral characteristics of mid-infrared light-emitting diodes with heterostructures based on InAs(Sb,P) emitting at T=300 K in the wavelength range 3.4–4.1 micrometers. The aim of the study was to search for the ways of increasing the diode efficiency. Methods. The heterostructures were grown from metal-organic chemical compounds with the use of vapor-phase epitaxial technique. The spectra were recorded under pulse excitation with the use of computer-controlled installation employing MDR-23 grating monochromator and a lock-in amplifier. InSb photodiode was used as a detector. Comparative study of electroluminescence spectra of the diodes was carried out at the temperatures equal to 300 K and 77 K. We compared the obtained data with the calculation results of the band diagrams of the heterostructures. Main Results. As a result of comparative study of the electroluminescence spectra of the diodes recorded at 300 K and 77 K we have established that increasing of their efficiency is hindered by substantial influence of Auger recombination. For the first time at 77 Кwe have observed the effect of stimulated emission from InAsSb active layer in light-emitting structures made of InAs/InAsSb/InAsSbP. For heterostructures with quantum wells InAs/(InAs/InAsSb)/InAsSbP we have found out that at 77 Кthe carrier recombination occurs outside quantum wells, which points out to the insufficient carrier localization in the active layer. Thus, we have shown that the efficiency of mid-infrared light-emitting diodes based on InAs(Sb,P) can be increased via suppression of Auger-recombination and improvement of carrier localization in the active region. Practical Relevance. The results of the study can be used for development of heterostructures for mid-infrared light-emitting diodes.
Keywords
Постоянный URL
Articles in current issue
- TRENDS IN THE DEVELOPMENT OF DETONATION ENGINES FOR HIGH-SPEED AEROSPACE AIRCRAFTS AND THE PROBLEM OF TRIPLE CONFIGURATIONS OF SHOCK WAVES. Part I. Research of detonation engines
- SPECIAL ASPECTS OF INITIAL OPTICAL SCHEME SELECTION FOR DESIGN OF NON-IMAGING OPTICAL SYSTEMS
- APPLICATION OF CHEMOMETRICS FOR ANALYSIS OF BIOAEROSOLS BY FLOW-OPTICAL METHOD
- APPROACH TO AUTOMATION OF LENS COMPONENTS CENTERING FOR ASSEMBLING OF DIFFERENT DESIGN OBJECTIVES
- METHOD FOR CREATION OF SPHERICAL PANORAMAS FROM IMAGES OBTAINED BY OMNIDIRECTIONAL OPTOELECTRONIC SYSTEMS
- LINE-FIELD SWEPT-SOURCE OPTICAL COHERENCE TOMOGRAPHY SYSTEM FOR NEAR INFRARED SPECTRAL REGION
- BACKSTEPPING ALGORITHM FOR LINEAR SISO PLANTS UNDER STRUCTURAL UNCERTAINTIES
- RESEARCH OF FREE MOTION TRAJECTORIES FEATURES OF CONTINUOUS SYSTEM DEFINED AS A CONSECUTIVE CHAIN OF IDENTICAL FIRST-ORDER APERIODIC LINKS
- SIMULATION OF SENSING ELEMENT OF TEMPERATURE SENSOR BASED ON SILICATE GLASS WITH SODIUM NANOPARTICLES
- (IN-) PRIVACY IN MOBILE APPS. CUSTOMER OPPORTUNITIES (in Engl.)
- PRINCIPLES OF INDICATION FOR EN-ROUTE FLIGHT PATHS OF THE AIRCRAFT ON THE SCREEN OF ON-BOARD DISPLAY DEVICES
- ERROR CORRECTION METHOD FOR SEQUENCING DATA WITH INSERTIONS AND DELETIONS
- CHOICE OF OPTION FOR IMPLEMENTATION OF THE MULTILEVEL SECURE ACCESS TO THE EXTERNAL NETWORK
- SYNTHESIS OF THE SECONDARY STRUCTURE OF ALGEBRAIC BAYESIAN NETWORKS: AN INCREMENTAL ALGORITHM AND STATISTICAL ESTIMATION OF ITS COMPLEXITY
- EFFECT OF MICROPHONES NON-IDENTITY ON THE MICROPHONE ARRAYS CHARACTERISTICS
- QUALITY CONTROL AUTOMATED LASER-ULTRASONIC METHOD FOR SOLDER JOINTS OF NOZZLES OF CHAMBERS IN LIQUID ROCKET ENGINES
- ROBUST MODIFICATION OF THE LASSO METHOD FOR GENOME-WIDE ASSOCIATION STUDY IN VIEW OF TARGET PHENOTYPE VALUES
- BENCHMARK SOLUTIONS FOR STOKES EQUATIONS WITH VARIABLE VISCOSITY IN CYLINDRICAL AND SPHERICAL COORDINATES
- INFORMATIONAL MODEL OF MENTAL ROTATION OF FIGURES
- WENO SCHEMES FOR SOLUTION OF UNSTEADY ONE-DIMENSIONAL GAS DYNAMICS TEST PROBLEMS
- AUTOMATED CONTROL SIMULATION OF PROFESSIONAL SKILLS FORMATION FOR PRODUCTION SYSTEM OPERATOR
- STUDY OF OPTICAL AND LUMINESCENT PROPERTIES OF POTASSIUM-ALUMINA-BORATE GLASS DOPED WITH Cr3+ IONS
- SPEAKER-DEPENDENT FEATURES FOR SPONTANEOUS SPEECH RECOGNITION