Heat and hydrodynamic calculation of tube-in-tube heat-exchanger
Annotation
The article deals with a calculation of tube-in-tube heat-exchangerwith capped end where cryogen from internal pipe is vaporized due to addition of heat from an object being cooled through the end, and the vapor is removed through circular duct between external and internal tube. The method is that the device is subdivided into several sections along the cryogen flow which are small enough to meet the desired calculation accuracy. Then the set of heat, temperature and pressure equations for every section are solved. Heat flow at the end and heat transfer to the external tube from the environment is set as the boundary conditions. The equations are solved by the method of simple iterations. Calculation results for different values of heat-exchanger parameters, heat transfer medium saturation pressure and heat load at the heat exchanger end, and heat gain from the environment are given.
Keywords
Постоянный URL
Articles in current issue
- The influence of whey protein hydrolysate on organoleptic characteristics of oxygen cocktails basis
- Evaluation of varieties and hybrids of carrots on the suitability of fast-frozen products
- Influence of cooling on the quality of autumnal apples
- Phytochemical composotoin of chicory (Cichorium Intybus L.) products
- Biotechnology whole-smoked poultry products
- Starter cultures for obtaining curd whey with improved organoleptic properties
- Formula of functional jelly using local berries
- Heat transfer and pressure drop at refrigerant boiling in the plate coils
- Determination of technological parameters of preheating of the polypropylene pipes for welding into the socket at low temperatures
- Centrifugal compression stage performance with fluorocarbon refrigerants of different conditional isentropic exponents
- Heat load calculation for the modules of combined type freezing units
- New methods of forecasting flow regimes for boiling refrigerant in macro- and minichannels
- Rankine cycle working fluid for the use of regasification cold
- Basis approximating functions selection to maximize heat transfer coefficient of water-propylene glycol electrolyte coolant