![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
INKJET PRINTING OF ALUMOOXIDE SOL FOR DEPOSITION OF ANTIREFLECTING COATINGS
![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
Annotation
Subject of Research. This work describes for the first time the formation of antireflective coating on the base of boehmite phase of AlOOH with low refractive index (1.35) by inkjet printing on the nonporous substrate. This method gives the possibility to increase the contrast of colorful interfering images by 32% obtaining by inkjet printing of titanium dioxide sol. The usage of this technology enables to obtain patterns with wide viewing angle and makes them highly stable. Methods. Traditional sol-gel method with peptizing agents and heating for 90oC was applied for sol synthesis. Then the mixture was under sonic treatment for the obtaining of viscous sol. The viscosity was determined by Brookfield HA/HB viscometer, and the surface tension by Kyowa DY-700 tensiometer. Aluminum oxide ink was deposited on polished slides (26×76 mm2, Paul Marienfeld, Germany), over titanium oxide layer. To print titania ink, we use a desktop office printer Canon Pixma IP 2840 and Dimatix DMP-2831. The thickness of an inkjet AlOOH layer after drying in the air and removal of the solvents did not exceed 150 nm with an RI not less than 1.35 in the entire visible range. Results. The stable colloidal ink was obtained for the first time on the base of aluminum oxide matrix with neutral pH. The rheology was regulated by controlling parameters of sol-gel method in the system of aqueous titanium dioxide sol and by adding ethanol that affects the charge of double electrical layer of disperse phase. The controllable coalesce of drops enables to apply antireflection coating within the thickness accuracy of 10 nm. The morphology of particles and the topology of printed structures were analyzed by optical, scanning electron and atomic-force microscopes. Practical Relevance. We have proposed the approach to obtain colorful, interference patterns using two types of high refractive inks with different refractive indexes. The inkjet printing method opens new opportunities for preparing optical waveguides and forming photon-induction panels for new generation of computers.
Keywords
Постоянный URL
Articles in current issue
- NANOSCALE STRUCTURES GENERATION WITHIN THE SURFACE LAYER OF METALS WITH SHORT UV LASER PULSES
- INCREASED IMAGE QUALITY BY SYNTHESIZING SPACE PHOTOS WITH DIFFERENT EXPOSURES
- ROBUST CONTROL ALGORITHM FOR MULTIVARIABLE PLANTS WITH QUANTIZED OUTPUT
- COLLAPSE KINETIC OF COMPOSITES BASED ON COPOLYMERS OF ACRYLIC ACID AND ACRYLAMIDE FILLED WITH BENTONITE IN AQUEOUS SOLUTIONS OF POLYVALENT METALS
- FORMATION OF NANOSTRUCTURED CuO FILM ON FLUOROPHOSPHATE GLASS SURFACE
- VIRTUAL REALITY FOR MANAGEMENT OF SITUATIONAL AWARENESS DURING GLOBAL MASS GATHERINGS
- MUTUAL IMAGE TRANSFORMATION ALGORITHMS FOR VISUAL INFORMATION PROCESSING AND RETRIEVAL
- AUTOMATIC ANALYSIS OF LOCAL ROUTES AND ADJACENT HOUSE TERRITORY FOR URBAN PLANNING SUPPORT
- METHOD OF RARE TERM CONTRASTIVE EXTRACTION FROM NATURAL LANGUAGE TEXTS
- ANALYSIS OF STATISTICAL DATA FROM NETWORK INFRASTRUCTURE MONITORING TO DETECT ABNORMAL BEHAVIOR OF SYSTEM LOCAL SEGMENTS
- ON INFORMATION SECURITY SOLUTIONS APPLICABLE TO D2D COMMUNICATIONS WITHIN THE 5G DOMAIN: ANALYZING THE INFLUENCE OF USER MOBILITY
- PROBABILITY DISTRIBUTION OVER THE SET OF CLASSES IN ARABIC DIALECT CLASSIFICATION TASK
- DYNAMIC FEATURE SELECTION FOR WEB USER IDENTIFICATION ON LINGUISTIC AND STYLISTIC FEATURES OF ONLINE TEXTS
- DEEP LEARNING MODEL FOR BILINGUAL SENTIMENT CLASSIFICATION OF SHORT TEXTS
- INNOVATIVE HEAT FLUX SENSOR
- APPROACH TO SYNTHESIS OF PASSIVE INFRARED DETECTORS BASED ON QUASI-POINT MODEL OF QUALIFIED INTRUDER
- NUMERICAL SIMULATION OF MASS TRANSFER IN CENTRIFUGAL EVAPORATOR
- A CALCULATION OF SEMI-EMPIRICAL ONE-ELECTRON WAVE FUNCTIONS FOR MULTI-ELECTRON ATOMS USED FOR ELEMENTARY PROCESS SIMULATION IN NONLOCAL PLASMA
- PARAMETRICAL IDENTIFICATION OF DIFFERENTIAL-DIFFERENCE HEAT TRANSFER MODEL DURING LIDAR TEMPERATURE MONITORING
- EFFECT OF UV LASER ON SPECTRAL PROPERTIES OF BORATE GLASSES DOPED WITH COPPER CHLORIDE NANOCRYSTALS
- PROJECT ENGINEERING DATA MANAGEMENT AT AUTOMATED PREPARATION OF DESIGN DOCUMENTATION
- CONTROL SYSTEM FOR TILTABLE PLATE WITH TWO DEGREES OF FREEDOM FOR RESEARCH OF DYNAMIC MANIPULATION PROBLEMS
- APPARATUS FOR SURFACE TREATMENT OF FREE-FORM OBJECT BY LASER RADIATION
- AUTOMATED REMOTE MANAGEMENT AND CONTROL SYSTEM OF THE LABORATORY EQUIPMENT