SPACE VECTOR MODULATION IN MULTILEVEL INVERTERS OF THE SERVO DRIVES OF THE TRAJECTORY MEASUREMENTS TELESCOPES
Annotation
Using the MatLab/Simulink mathematical model of a three-phase three-level voltage inverter, the influence of the space-vector modulation (SVM) algorithm on the pulsations of the current (torque) of an AC motor in the range of low rotation speeds is considered. It is shown that the SVM of the second kind does not provide a pulsations level comparable to the pulsations of a sinusoidal pulse-width modulation (SPWM), both in the static mode of the drive operation and in transient modes. In such case, the current pulsations cannot be reduced by changing the modulation algorithm, which almost excludes the possibility of using such transducers in high-quality adjustable instrumental AC electric drives. At the same time, SVM of the first kind can be considered as an alternative to SPWM, as it allows to reduce the current pulsations in the largest part of the control range to a comparable level, and in the last quarter of the control range to values significantly lower than with the SPWM. The asymmetry of the inverter characteristics with the SVM is noted for different directions of the modulation vector rotation.
Keywords
Постоянный URL
Articles in current issue
- LARGE OPTICAL SPACE-BASED TELESCOPES
- ENSURING DYNAMIC SYSTEM STABILITY UNDER CONSTRAINED PERTURBATIONS IMPACT
- STABILITY OF DESIRED STATIONARY REGIME OF CLOSED-LOOP SYSTEMS WITH PERIODICALLY CHANGING STRUCTURE
- SPACE VECTOR MODULATION IN MULTILEVEL INVERTERS OF THE SERVO DRIVES OF THE TRAJECTORY MEASUREMENTS TELESCOPES
- METHOD FOR PSEUDO-NOISE SIGNAL GENERATION BASED ON M-SEQUENCES WITH NON-MULTIPLE RECURRING PERIODS
- ANALYSIS OF COMPLEX FILTERS WITH THE USE OF TRANSITION CHARACTERISTICS
- QUALITY ASSESSMENT CRITERIA FOR IMAGE FUSION IN MULTISPECTRAL OPTICAL-ELECTRONIC SYSTEMS
- POTENTIAL ACCURACY OF SLANT RANGE MEASUREMENT WITH THE INERTIAL INPUT CIRCUIT OF RECEIVING SYSTEM
- AFOCAL COMPENSATORS OF OPTICAL SYSTEMS ABERRATIONS
- UNCERTAINTY OF NON-STATIONARY HEAT FLUX RECOVERY BY PARAMETRIC IDENTIFICATION OF DIFFERENTIAL-DIFFERENCE MODEL OF HEAT TRANSMISSION
- PRODUCTION TESTING OF REFRACTOMETRIC DEVICE FOR CONTROL OVER LIQUID-PHASE MEDIA
- STUDY OF ACOUSTO-ELASTIC PROPERTIES OF THIN WIRES