![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
METHOD AND TECHNOLOGY OF DELIVERING OPTICAL RADIATION TO BIOLOGICAL MICRO-OBJECTS
![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
Annotation
Subject of Research. We propose a method and technology of delivering optical radiation to biological single micro-objects at wavelength equal to 650 nm. The delivering optical radiation is implemented by a fiber optic system that is a standard optical fiber with a reduced diameter at the output end (cone optical fiber, or fiber optic taper). Method. The method essence appears as the creation of a fiber optic system for delivering optical radiation. A sampling method of fiber optic tapers by a fusion splicer for optical fibers is proposed in this paper. The process of protective coating formation, opaque to optical radiation exiting through the side surface of the fiber taper, is described. The end of the fiber optic taper is prepared to obtain a uniform intensity distribution of the outgoing optical radiation. The study of the divergence of optical radiation exiting from the taper end is carried out. Main Results. The proposed method has enabled creation of a fiber-optic taper with a waist diameter of 15±5 μm. The carried out study of optical radiation divergence has shown that the field diameter at a distance of not more than 200 μm to the micro-object is approximately 19 μm and does not exceed the taper waist diameter. Practical Relevance. Unlike other existing methods of delivering optical radiation, a fiber taper with a waist diameter of 15 ± 5 μm provides an impact not only on individual cells but also specific regions of cells with the size that exceeds the taper waist diameter. With the help of the manipulator, the end of the fiber taper can be placed into the required area without overlapping the object to the required distance directly in the environment where biological objects are located (cell cultures).
Keywords
Постоянный URL
Articles in current issue
- SKIN RESEARCH BY SCATTERING ELLIPSOMETRY
- BRAGG GRATINGS MULTIPUSLE INSCRIPTION EFFICIENCY DEPENDENCE ON ANGULAR POSITION OF ELLIPTICAL STRESS CLADDING IN BIREFRINGENT OPTICAL FIBERS
- DEVELOPMENT AND RESEARCH OF FIBER-OPTIC HYDROPHONE PROTECTIVE HOUSING
- METHOD AND TECHNOLOGY OF DELIVERING OPTICAL RADIATION TO BIOLOGICAL MICRO-OBJECTS
- LED DEVICE FOR PHOTODYNAMIC THERAPY OF ONYCHOMYCOSIS
- TRAJECTORY CONTROL FOR A ROBOT MOTION IN PRESENSE OF MOVING OBSTACLES
- TRACKING AND CLASSIFICATION OF HEAD MOVEMENT BY INERTIAL MEASUREMENT UNIT DATA
- NANOPARTICLES OF EXOTIC EPSILON-IRON OXIDE (III) AS THE WORKING ENVIRONMENT OF NANOMAGNETIC LOGIC DEVICES
- DETERMINATION OF ZONES WITH DIFFERENT CHEMICAL COMPOSITION ON REMOTE SURFACES
- SIMULATION OF INFRARED SPECTRA OF MEDICAL SUBSTANCES BY DIFFERENT QUANTUM MECHANICAL METHODS
- RESEARCH OF “WATER GLASS - GRAPHITE MICROPARTICLES” COMPOSITE MATERIAL BY THERMOGRAVIMETRY METHOD
- STUDY OF PLASMOCHEMICAL PROCESSING EFFECT ON THE PROPERTIES OF POLYMER FILMS BASED ON POLYVINYLCHLORIDE
- ORGANIZATION OF SIMULATION EXPERIMENTS IN THE DESIGN OF DISTRIBUTED COMPUTER SYSTEMS WITH REDUNDANT DATA TRANSMISSION
- METHOD FOR REAL TIME PROCESSING OF OPEN DATA CONTAINING GEOCONTEXT MARKUP
- COOPERATIVE INTERACTION OF EXPERT NETWORKS PARTICIPANTS: STATE-OF-THE ART ANALYSIS
- MULTI-STEP SERVICE OF REQUESTS CRITICAL TO QUEUEING DELAYS IN MULTI-TIER SYSTEMS
- STUDY OF ERRORS OF SOME METHODS FOR SEPARATING OVERLAPPED SPECTRAL LINES UNDER NOISE EFFECT
- DETECTION OF HYDRO-ACOUSTIC COMMUNICATION SIGNAL BY ENERGY ALGORITHM IN LOW FREQUENCY PASSIVE MODE
- FEATURES OF DIFFERENCE SCHEME WITH CUSTOMIZABLE DISSIPATIVE PROPERTIES IN CASE OF TWO-DIMENSIONAL GAS AND GAS-PARTICLE DYNAMICS PROBLEMS
- MODELING OF NON-PLATFORM INERTIAL NAVIGATION SYSTEM AS A COMPONENT OF AIRCRAFT NAVIGATION COMPUTER STAND
- SIMULATION OF CENTRIFUGAL PUMP IMPELLER WITH MAXIMUM CAVITATION EFFECT
- NUMERICAL SIMULATION OF REGULAR AND MACH REFLECTION OF SHOCK WAVE FROM THE WALL
- MODELS AND METHODS OF INFORMATION MANAGEMENT SUPPORT IN CASE OF FINANCE PLANNING
- GENERATION OF SPECTRAL DENSITY MATRICES FOR MULTICHANNEL CONTINUOUS SYSTEMS UNDER WHITE NOISE ACTION
- SEQUENCES OF DIFFERENTIAL INEQUALITIES FOR LYAPUNOV FUNCTIONS IN STABILITY ESTIMATES OF NONLINEAR DYNAMICAL SYSTEMS
- NEW ALGORITHM OF VARIABLE PARAMETERS IDENTIFICATION FOR LINEAR REGRESSION MODEL
- ON FLAME FRONT PROPAGATION RATE IN CYLINDRICAL TUBE WITH MULTIPOINT IGNITION BY STREAMER MICROWAVE DISCHARGE