![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
EFFECTIVE METHOD OF MODIFYING CODE WITH ON-BITS SUMMATION
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
A new principle of modification of codes with summation of on-bits that allows to expand the class of modified codes and obtain codes with better characteristics of low multiplicity error detection is proposed. An overview of known methods of classical codes modifications with summation of individual information bits is presented. A method of constructing modified codes with summation, based on determination of the smallest nonnegative deduction weight incomplete information vector and control of "unused" information bits by using the correction coefficient, which is a convolution modulo two is described; in particular, the correction factor may include discharge, subject to a deduction of the weight. All the possible ways of constructing error-correcting codes modified with the summation are considered. Characteristics of error detection in the information vectors of these codes are analyzed. The conditions, under which a code with summation detects the maximal number of double errors in the information vectors and the conditions under which the code will have the minimum number of monotone non-detectable errors are established. The presented principle of codes modification is shown to allow for increasing the number of well-known codes used in technical diagnostics of discrete systems.
Keywords
Постоянный URL
Articles in current issue
- TRAJECTORY CONTROL OVER RIGID BODY MOVEMENT RELATIVE TO A MOBILE OBJECT
- CRITERIUM FORMALIZATION IN THE PROBLEM OF MULTIDIMENSIONAL ESTIMATION OF OBJECTS
- DISPLACEMENT AND ROTATION ANGLE SENSOR FOR SYSTEM OF PROGRAMMING CONTROL OF MACHINES
- REDUNDANT SERVICE IN GROUP OF SINGLE-CHANNEL SYSTEMS WITH DIFFERENT PRIORITIES ASSIGNED TO REQUEST COPIES
- ACTIVE-PULSE OBSERVATION METHOD USING CCD PHOTODETECTOR WITH INTERLINE TRANSFER
- ANALYSIS OF THE INFLUENCE OF ERRORS IN LAYERS MANUFACTURING OF OPTICAL COATING ON ITS SPECTRAL CHARACTERISTICS
- GRADIENT LENS WITH A POSITIVE IMAGE CURVATURE IN OPTICAL SCHEMES OF ENDOSCOPIC TYPE AND PIN HOLE LENSES
- SYNTHESIS OF REFLECTORS FOR AUTOCOLLIMATION MEASUREMENTS WITH INCREASED OPERATIONAL DISTANCE
- FORECASTING THE LEVEL OF PARASITIC VIBRATIONS OF THE MILLING SYSTEM IN THE CUTTING ZONE THROUGH ANALYSIS OF NOISE ACTIVITY
- FORMATION OF ANTIREFLECTION MICRORELIEF ON SILICON SURFACE IRRADIATED WITH NANOSECOND ITTERBIUM LASER
- APPLICATION OF MODERN TECHNOLOGIES IN CAR DRIVER ASSISTANCE SYSTEMS
- RASTER STRUCTURES AND VISION
- HARDWARE AND SOFTWARE SYSTEM FOR CHROMATOGRAPHIC DETECTOR OF THERMAL CONDUCTIVITY IN THE MUSUN EXPERIMENT
- TEMPORAL ANALYSIS OF H.264 CODEC