![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
INVESTIGATION ON CORRECTING PROCESS OF SPHERICAL ROTOR IMBALANCE AT THIN FILM DEPOSITION STAGE
![Scientific and Technical Journal of Information Technologies, Mechanics and Optics](/images/mag-ntv.png)
Annotation
We propose a method of rotor imbalance correction for electrostatic gyroscope. The method is based on redistribution of the material on the beryllium rotor surface during deposition of the titanium nitride coating by cathodic arc physical vapor deposition (Arc-PVD) technique. The deposition process is carried out using one arc source made of BT-1-00 material, located in the horizontal plane of the vacuum chamber of "Bulat-6" installation at nitrogen pressure of 1.2ˑ10-3 Pa. Size distortion of the rotor caused by thermal expansion during heating to 300 °C, is not more than one hundredth of a micrometer because of the high dimensional stability of beryllium. The titanium nitride coating with a thickness about 1 μm is formed during 30 min deposition on the spherical surface of the rotor with a diameter of 10 mm. The imbalance correction is achieved by deposition of the coating with the center of the coating sphere displaced relative to the geometrical center of the rotor in the direction opposite to the direction of the rotor imbalance vector. The required displacement is determined by the rotor kinematics during the deposition process and is provided by the developed device with three degrees of freedom: two rotational ones – constant and cyclic around two different axes of the rotor, and reciprocating displacement of the rotor relative to the source of the sputtered material along the flow axis of this material. The developed device provides fastening of the rotor in four- needle clamp. The calculation of rotor fixation scheme in this clamp is carried out, ensuring the positioning needles outside the area of the raster pattern formed in the rotor equatorial zone during the next laser marking operation. The experimental data showed that it is possible to produce real rotors with the imbalance correction accuracy within two decimal places of a micrometer.
Keywords
Постоянный URL
Articles in current issue
- ON MODERN APPROACH TO AIRPLANE-TYPE UNMANNED AERIAL VEHICLES DESIGN WITH SHORT TAKEOFF AND LANDING
- SEARCH AUTOMATION OF BINARIZATION OPTIMUM LEVEL FOR SYNTHESIZED HOLOGRAMS
- INSCRIPTION PROCESS RESEARCH AND OPTIMIZATION FOR SUPERIMPOSED FIBER BRAGG GRATINGS
- SPATIALLY SELECTED SPECKLE-CORRELOMETRY OF TEMPERATURE DEPENDENT GELATION KINETICS
- CONVERGENCE SPEED INCREASE OF A FINITE-TIME STABLE CONTROL SYSTEM
- ROBUST PROPERTIES OF SYSTEMS WITH NEGATIVE DEGREE OF HOMOGENEITY WITH RESPECT TO DELAY
- COMPUTER SIMULATION OF INTERACTION OF LYSINE DENDRIMERS WITH STACK OF AMYLOID PEPTIDES
- INVESTIGATION ON CORRECTING PROCESS OF SPHERICAL ROTOR IMBALANCE AT THIN FILM DEPOSITION STAGE
- ALGEBRAIC MANIPULATION DETECTION CODES WITH PERFECT NONLINEAR FUNCTIONS UNDER NON-UNIFORM DISTRIBUTION
- DISTRIBUTION OF RESOURCES BASED ON HYBRID MODELS OF SWARM INTELLIGENCE
- SHAPE RESTORATION OF THREE-DIMENSIONAL OBJECT FROM TWO-DIMENSIONAL IMAGES
- AUTOMATED SIMULATION TECHNOLOGY OF MULTI-HOP WIRELESS NETWORKS IN HETEROGENEOUS MODELING ENVIRONMENT
- VARIANT OF ODOR SYSTEM FOR THREATS RECOGNITION
- ADAPTIVE SELECTION OF ARTIFICIAL IMMUNE SYSTEMS AND LOCAL SEARCH MUTATION OPERATORS
- NONLINEAR DYNAMICS AND STABILITY OF MICROSYSTEMS ENGINEER-ING ELEMENTS
- IDENTIFICATION OF PIEZOACTUATOR PARAMETERS
- SPECIAL DESIGN ASPECTS OF GRIPPING DEVICES FOR INCREASING THE FLEXIBILITY OF AUTOMATED AND ROBOTIC MANUFACTURING LINES AT INSTRUMENT MANUFACTURING FACILITIES
- AN APPROACH TO RELIABILITY INCREASE OF TURBINE SAFETY SYSTEM BASED ON HIDDEN RESERVES
- OPERATIONAL CONTROL METHOD FOR TRAIN INTEGRITY MONITORING BASED ON OPTICAL COHERENT REFLECTOMETRY DATA
- LOWER LIMB EXOSKELETONS: BRIEF REVIEW
- MODELING OF LOCOMOTOR SYSTEM DYNAMICS
- EXPERIMENTAL INVESTIGATION OF WINDING DIAMETER EFFECT ON OPTICAL PROPERTIES OF HI-BI FIBER WITH TIN COATING
- DIGITALIZATION OF PROJECT AND PRODUCTION PROCEDURES AS A TOOL FOR INSTRUMENTATION DESIGN AUTOMATION IN INDUSTRY 4.0