INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF METAL — NON-METAL FRICTION PAIRS FOR DESIGNING BIOMECHATRONIC SYSTEMS
Annotation
Processes occurring on the surfaces of materials during interaction between metal and non-metal parts of orthoses, prostheses and exoskeletons are considered. These biomechatronic devices are noted to require careful selection of materials for their design and manufacturing with the account for both mechanical properties of the materials and their tribological characteristics. Samples of duralumin — fluoropolymer and stainless steel 100CrMn6 — fluoropolymer friction pairs are chosen for the research; the plane-on-plane contact scheme without any lubricants is applied. Results of experiments carried out with the use of the universal friction machine MTU-1 are described. Dependencies of friction torque, friction coefficient, and the temperature in the contact area on the runtime are obtained on the base of the experimental data. Estimation of the wear of contacting samples is presented. Analysis of the results are reported to justify the choice of suitable materials for design of orthoses, prostheses and exoskeletons.
Keywords
Постоянный URL
Articles in current issue
- FEATURES OF DESTRUCTION OF MATERIAL SURFACE, STRENGTHENED BY PARTICLES
- METHODS OF COMPENSATION OF THERMO-OPTICAL DISTORTIONS IN ACTIVE ELEMENT OF SOLID-STATE LASER
- VIBROACOUSTIC CONTROL OF WEARING OF SAMPLES OF CYLINDRICAL FRICTION COUPLE
- CALCULATION OF ACCURACY PARAMETERS OF EVOLVENT CYLINDRICAL GEAR TRANSMISSIONS
- INVESTIGATION OF GEAR TOPS WEARING WITH THE USE OF THE EVOLUTION MODEL OF GEAR WHEELS INTERACTION
- KINETICS OF DYNAMICALLY UNBALANCED ROTATOR WITH DRY SLIDING FRICTION IN THE AXLE SUPPORTS
- APPROXIMATE GEAR TRANSMISSION WITH A PIECE-LINEAR CONTACT
- ENERGY-EFFICIENT TRAJECTORY CONTROL OVER MANIPULATORS WITH REDUNDANT NUMBER OF DEGREES OF FREEDOM
- PROBLEMS OF CREATING ACTUATORS BASED ON ELASTIC ELEMENTS
- DESIGNING A TEST BENCH FOR A WAVING WING MECHANISM CONTROL
- DESIGNING COMPOSITE WINDING AND MANAGING THE PROCESS OF ITS FORMATION
- DEVELOPMENT OF SOFTWARE COMPONENT FOR MODULE OF LENGTHY OBJECTS SHOOTING FOR SAWN TIMBER SCANNER
- AN ALGORITHM OF SHARED CONTROL OF INTELLECTUAL WHEELCHAIR MOVEMENT
- DEVELOPMENT OF A REHABILITATION DEVICE FOR THE ELBOW JOINT
- MORPHOLOGICAL ANALYSIS IN THE PROBLEMS OF AUTOMATION OF THE KNEE JOINT IMAGE PROCESSING