![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
MINIMIZATION OF MECHANICAL STRESSES IN SENSITIVE ELEMENT OF MICRO-PRESSURE SENSOR UNDER PACKAGING
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
Results of studies of mechanical stresses that occur in the sensitive element of micro-pressure sensor when it is mounted in the package are presented. The finite element method is used to numerically simulate both the residual mechanical stresses of the sensitive element crystal and the stresses caused by thermal expansion-compression, when the sensitive element crystal is placed in the system which binds support crystal and package. The optimal design of support crystal, which includes both two-dimensional and three-dimensional temperature compensator elements, is found to allow for minimizing stresses caused by temperature fluctuations. Among the considered types of support crystals, the ones that do not add additional negative functional in the output characteristic during sensitive element operation are selected, and a design that is easy to manufacture is chosen. An appropriate model of support crystal that is applicable for sensitive element sensor of both the absolute and differential pressure is proposed.
Keywords
Постоянный URL
Articles in current issue
- ANALYSIS OF ENERGY RESOURCE DEPLETION ATTACKS ON WIRELESS DEVICES
- METHODICAL APPROACH TO ESTIMATION OF OPERATION EFFECTIVENESS OF INFORMATION SYSTEM WITH TEMPORARY REDUNDANCY
- SYNTHESIS OF COMPLEX DISCRETE FILTERS BY METHOD OF INVARIANT DIFFERENTIAL EQUATIONS
- WEIGHTED CODE WITH SUMMATION WITHOUT CARRIES FOR SOLVING THE PROBLEMS OF TECHNICAL DIAGNOSTICS OF DISCRETE SYSTEMS
- BROADBAND ANTIREFLECTIVE COATING BY THE METHOD OF MOLECULAR LAYER DEPOSITION
- CHANGES IN CHARACTERISTICS OF OPTICAL SENSORS OF THE CONTROL SYSTEM OF THE MOTION OF A SPACE APPARATUS UNDER THE IMPACT OF LASER RADIATION
- COMPENSATION OF ERROR CAUSED BY INHOMOGENEOUS AIR PATH IN THE CONTROL SYSTEM OF REFERENCE MARKS SPATIAL POSITION
- APPLICATION OF FIBER AND THERMAL-SENSITIVE ELEMENTS IN SECURITY AND FIRE ALARM SYSTEMS
- TECHNOLOGICAL FEATURES OF NITROGENING THREAD SURFACES OF CRITICAL PARTS OF ELECTROMECHANICAL DRIVE
- STRUCTURE OF THE IMITATION MODEL OF A PEDESTRIAN NAVIGATION SYSTEM
- METHOD OF EXPANSION OF THE WORKING ZONE OF THE ROBOT MANIPULATOR AND INCREASING THE FLEXIBILITY OF TECHNOLOGICAL LINES
- MODIFIED METHOD FOR PARAMETERS ESTIMATING IN FINITE-TIME CONTROL SYNTHESIS
- INCREASING THE DYNAMIC ACCURACY OF DIGITAL FOLLOWING SYSTEMS OF AUTOMATION INDUSTRIAL CONTROL SYSTEM WITH THE USE OF COMBINED CONTROL. PART I. LOW SPEED OF MISMATCH CALCULATION