![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
KINETICS OF DYNAMICALLY UNBALANCED ROTATOR WITH DRY SLIDING FRICTION IN THE AXLE SUPPORTS
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
The dynamics of free and forced rotation of a rigid body around the central but not the principal axis of inertia Oz, supported by a bearing and thrust bearing, is modeled mechanically under the conditions of hydrodynamic and dry friction. It is shown that The inertial pairs and pairs of dry friction arising in the plane of the axis are shown to depend not only on the centrifugal moments of inertia and the angular velocity, but also on the acceleration. The revealed dependence leads to dynamic equations with an irrational right-hand side in the general case, and with a discontinuous one in the particular case. The equations for simplest types of the motion are integrated analytically and numerically.
Keywords
Постоянный URL
Articles in current issue
- FEATURES OF DESTRUCTION OF MATERIAL SURFACE, STRENGTHENED BY PARTICLES
- METHODS OF COMPENSATION OF THERMO-OPTICAL DISTORTIONS IN ACTIVE ELEMENT OF SOLID-STATE LASER
- VIBROACOUSTIC CONTROL OF WEARING OF SAMPLES OF CYLINDRICAL FRICTION COUPLE
- INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF METAL — NON-METAL FRICTION PAIRS FOR DESIGNING BIOMECHATRONIC SYSTEMS
- CALCULATION OF ACCURACY PARAMETERS OF EVOLVENT CYLINDRICAL GEAR TRANSMISSIONS
- INVESTIGATION OF GEAR TOPS WEARING WITH THE USE OF THE EVOLUTION MODEL OF GEAR WHEELS INTERACTION
- KINETICS OF DYNAMICALLY UNBALANCED ROTATOR WITH DRY SLIDING FRICTION IN THE AXLE SUPPORTS
- APPROXIMATE GEAR TRANSMISSION WITH A PIECE-LINEAR CONTACT
- ENERGY-EFFICIENT TRAJECTORY CONTROL OVER MANIPULATORS WITH REDUNDANT NUMBER OF DEGREES OF FREEDOM
- PROBLEMS OF CREATING ACTUATORS BASED ON ELASTIC ELEMENTS
- DESIGNING A TEST BENCH FOR A WAVING WING MECHANISM CONTROL
- DESIGNING COMPOSITE WINDING AND MANAGING THE PROCESS OF ITS FORMATION
- DEVELOPMENT OF SOFTWARE COMPONENT FOR MODULE OF LENGTHY OBJECTS SHOOTING FOR SAWN TIMBER SCANNER
- AN ALGORITHM OF SHARED CONTROL OF INTELLECTUAL WHEELCHAIR MOVEMENT
- DEVELOPMENT OF A REHABILITATION DEVICE FOR THE ELBOW JOINT
- MORPHOLOGICAL ANALYSIS IN THE PROBLEMS OF AUTOMATION OF THE KNEE JOINT IMAGE PROCESSING