![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
DESIGNING COMPOSITE WINDING AND MANAGING THE PROCESS OF ITS FORMATION
![Scientific and technical journal «Priborostroenie»](/images/mag-pr.png)
Annotation
Filament winding is a common method of manufacturing cylindrical composite products. It is the process of placing threads or tapes in strict geometric order on the surface. The winding material is usually carbon fiber or glass fiber coated by a synthetic resin. The mandrel is removed when the resin hardens and then the final product is formed. Linear speed of winding material and thread tension (tape) are maintained at a given level by special devices in the process of winding up, so no less it is impossible to stabilize the winding tension of the surface layer and to ensure the same winding mode and the same winding density for all reproduced products. Final products have differentiations in radius of winding along generator line of the cylindrical body and surface layer of the finished product has tuberosity. To address this shortcoming, a control system of the composite winding density is proposed. The system is anticipated to ensure stability of the composite product’s geometric parameters and its density.
Keywords
Постоянный URL
Articles in current issue
- FEATURES OF DESTRUCTION OF MATERIAL SURFACE, STRENGTHENED BY PARTICLES
- METHODS OF COMPENSATION OF THERMO-OPTICAL DISTORTIONS IN ACTIVE ELEMENT OF SOLID-STATE LASER
- VIBROACOUSTIC CONTROL OF WEARING OF SAMPLES OF CYLINDRICAL FRICTION COUPLE
- INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF METAL — NON-METAL FRICTION PAIRS FOR DESIGNING BIOMECHATRONIC SYSTEMS
- CALCULATION OF ACCURACY PARAMETERS OF EVOLVENT CYLINDRICAL GEAR TRANSMISSIONS
- INVESTIGATION OF GEAR TOPS WEARING WITH THE USE OF THE EVOLUTION MODEL OF GEAR WHEELS INTERACTION
- KINETICS OF DYNAMICALLY UNBALANCED ROTATOR WITH DRY SLIDING FRICTION IN THE AXLE SUPPORTS
- APPROXIMATE GEAR TRANSMISSION WITH A PIECE-LINEAR CONTACT
- ENERGY-EFFICIENT TRAJECTORY CONTROL OVER MANIPULATORS WITH REDUNDANT NUMBER OF DEGREES OF FREEDOM
- PROBLEMS OF CREATING ACTUATORS BASED ON ELASTIC ELEMENTS
- DESIGNING A TEST BENCH FOR A WAVING WING MECHANISM CONTROL
- DEVELOPMENT OF SOFTWARE COMPONENT FOR MODULE OF LENGTHY OBJECTS SHOOTING FOR SAWN TIMBER SCANNER
- AN ALGORITHM OF SHARED CONTROL OF INTELLECTUAL WHEELCHAIR MOVEMENT
- DEVELOPMENT OF A REHABILITATION DEVICE FOR THE ELBOW JOINT
- MORPHOLOGICAL ANALYSIS IN THE PROBLEMS OF AUTOMATION OF THE KNEE JOINT IMAGE PROCESSING