DETACHED-EDDY SIMULATION OF TURBULENT AIRFLOW
Annotation
A brief survey of the most significant mathematical models of the air and fluid flows from Prandtl’s mixing length layer theory to RANS models with one and two differential equations, as well as unsteady LES and DES models is given. Detachededdy simulation was first proposed by P.Spalart in 1997 and combined the main advantages of LES and RANS methods which gave the researchers the possibility to widen the sphere of such models application. The authors give the basic mathematical description of DES models paying special attention to the most important differences between DES and RANS models. The 3D geometrical model of human nasal cavities obtained from computer-aided tomography data using Mercury Amira program is also given. The 3D unstructured mesh with 1,5×107 finite elements was constructed after the segmentation using Altair Hypermesh software had been finished. The mesh was used to set up an unsteady simulation of airflow inside the obtained geometrical model. Application of DES method on the mesh of а good quality made it possible to distinguish the small-scale turbulent swirls inside the flow. A solid-state model of human nasal cavities for experimental investigation of the breathing process was designed. The measured values of the pressure drops inside the model during breathing simulation showed good correlation with results obtained from the numerical calculations using Ansys software. The conclusion was made that DES models may be used for flows simulation of liquids and gases in non-regular shaped channels.
Keywords
Постоянный URL
Articles in current issue
- OPTICAL CONTROL IN THE QUALITY MANAGEMENT SYSTEM OF PISTON RINGS PRODUCTION
OPTICAL SPECTRAL TECHNOLOGIES APPLICATION FOR CONTROL AND DIAGNOSTICS OF BLEACHING WORKS IN THE PULP AND PAPER INDUSTRY
- REMOTE LASER IDENTIFICATION OF THE BUILDING MATERIAL TYPE
- DYNAMIC PARAMETERS OPTIMIZATION FOR TRIGGER TYPE OPTICAL PROBE
- Genomic variants’ analysis of Escherichia coli K-12 cells resistant to phage T7 infection
- Тест
- ANALYSIS OF INTERFEROMETER DATA PROCESSING METHODS IN SPECTRAL OPTICAL COHERENCE TOMOGRAPHY ТОМОГРАФИИ
- RECONSTRUCTION OF DIGITAL FOURIER HOLOGRAM IN CASE OF NYQUIST FREQUENCY EXCESS
- SMALL DISPLACEMENTS DETERMINATION OF OBJECTS SURFACE BY DIGITAL HOLOGRAPHY METHODS
- TERAHERTZ TRANSMISSION AND REFLECTION SPECTRA OF CATARACT MODIFIED HUMAN CRYSTALLINE LENS
- FORMATION OF THE ALGORITHMIC RECURSIVE CORRECTION FOR SYSTEMATIC CODES MULTIPLE ERRORS BASED ON QUASI-SYNDROMES IN THE RATE OF HARDWARE TIME
- PHYSICAL PROCESSES RESEARCH IN THE PULSE XENON LAMP AT THE PUMP ELECTRICAL CIRCUIT OPERATION ON THE BASIS OF MODULATOR WITH THE PARTIAL DISCHARGE CONDENSER
- SYNTHESIS OF OPTIMAL ARTIFICIAL NEURAL NETWORKS BY MODIFIED GENETIC ALGORITHM
- CONTROL SYSTEM IDENTIFICATION AND ADJUSTMENT FOR THE ELECTRO DRIVE OF TELESCOPE AZIMUTHAL AXIS
- PROBLEM-ORIENTED AGENT-BASED PLATFORM OF MULTI MODEL COMPLEXES DESIGN FOR REGIONAL SAFETY MANAGEMENT SUPPORT
- SYSTEMS OF DUPLICATED COMPUTER COMPLEXES WITH REQUESTS REALLOCATION
- DE BRUIJN SEQUENCES APPLICATION FOR PSEUDO REGULAR CODE SCALES GENERATION
- DEVELOPMENT PROBLEMS OF THE ENTERPRISE IT- INFRASTRUCTURE
- KINEMATIC CONTROL OF TWO-PARAMETRICAL SCANNING AERIAL
- QUANTITATIVE DESCRIPTION OF NONLINEAR DYNAMICS IN THE POROUS ACRYLIC THIN FILM
- METHOD OF THE FREE-CONVECTION HEAT EXCHANGE CALCULATION ON SOLID SURFACES IN A WIDE TEMPERATURE RANGE
- MATHEMATICAL ESTIMATION MODELS OF INFORMATION SECURITY SYSTEM INFRASTRUCTURE AT THE ENTERPRISE
- MALWARE DETECTION METHOD BASED ON THE PROGRAM DISTRIBUTION PROCESS ANALYSIS
- PROBABILISTIC ANALYSIS MODEL FOR INFORMATION INFLUENCE
- INFORMATION PROTECTION AGAINST INTENTIONAL ELECTROMAGNETIC INFLUENCES
- INTEGRATED ENGINEERING DESIGN TECHNOLOGIES FOR POLYMERIC COMPOSITE MATERIALS
- PRODUCT SURFACE QUALITY PROVIDING ON ELECTRO-EROSION EQUIPMENT
- MANAGEMENT SCIENTIFIC PRECONDITIONS FOR INTELLECTUAL PROPERTY IN THE PROBLEMS DECISION OF INNOVATIVE DEVELOPMENT OF RUSSIA
- METHODOLOGICAL BASIS OF SUSTAINABILITY AND SUSTAINABLE DEVELOPMENT OF BUSINESS STRUCTURES AS SOCIO-ECONOMIC SYSTEMS
- RISK MANAGEMENT SYSTEM IMPROVEMENT FOR GOODS AND VEHICLES MOVEMENT THROUGH CUSTOMS BORDER OF THE RUSSIAN FEDERATION
- INNOVATION STAGES DISTRIBUTION OF VENTURE CAPITAL INVESTMENTS IN RUSSIA AND THE UNITED STATES
- PROJECT MANAGEMENT MODEL FOR UNIVERSITY MAIN COMPETENCE-ORIENTED EDUCATIONAL PROGRAMS
- TEMPERATURE DEPENDENCE OF REFRACTION INDEX FOR ETHYLENE GLYCOL AND PROPYLENE GLYCOL AQUEOUS SOLUTIONS
- SOFTWARE ARCHITECTURE FOR THE AUTOMATED WORKPLACE OF THE ONBOARD AVIATION EQUIPMENT DEVELOPER
- LIFE CYCLE “DESIGN-MANUFACTURE-OPERATION” REALIZATION FOR ONBOARD EQUIPMENT AT THE AVIATION INDUSTRY ENTERPRISES
- ON THE INFORMATION SECURITY WORKS AGAINST INTENTIONAL ELECTROMAGNETIC INFLUENCES
- CONSOLIDATION OF DIVERSE CHANNELS OF COMPUTER NETWORK
- ESTIMATION OF FUNCTIONAL SAFETY FOR THE DUPLICATED COMPUTING SYSTEMS
- FINANCIAL PLANNING SYSTEMS REVIEW IN THE MARKET OF KAZAKHSTAN
- MUSICAL COMPUTER TECHNOLOGIES IN THE MODERN PROFESSIONAL MUSIC EDUCATION