Determination of technological parameters of preheating of the polypropylene pipes for welding into the socket at low temperatures
Annotation
The mathematical model of a thermal process for the development of socket welding technology at temperatures below standard is offered. The heating stage of the welded ends of polypropylene pipe and fitting by means of special replaceable nozzles for subsequent welding at low temperatures is considered. Thermal process is simulated in the polypropylene pipe contacting to a replaceable nozzle at the base of which the constant temperature is kept by a heating plate of a definite temperature. Calculations have shown that heating plate temperature increase from 20 оСto 35 оСresults in twofold reduction of heating duration including the duration of cooling for equalization of temperatures. Computational experiments show that the temperature distribution in the wall of the hot-water pipe with diameter of 110 mm is close to the uniformed one from allowable welding range and is obtained by heating of an additional welding apparatus with replaceable nozzles, the apparatus heating plate having temperature of 35 оC. At low temperatures it is enough to maintain a heating plate temperature of 20 оC for heating the pipes of cold water supply. The offered method can be used for determination of technological parameters of preheating (the duration of heating and cooling) for polypropylene pipes and fittings of hot and cold water supply of various diameters at low ambient temperatures.
Keywords
Постоянный URL
Articles in current issue
- The influence of whey protein hydrolysate on organoleptic characteristics of oxygen cocktails basis
- Evaluation of varieties and hybrids of carrots on the suitability of fast-frozen products
- Influence of cooling on the quality of autumnal apples
- Phytochemical composotoin of chicory (Cichorium Intybus L.) products
- Biotechnology whole-smoked poultry products
- Starter cultures for obtaining curd whey with improved organoleptic properties
- Formula of functional jelly using local berries
- Heat transfer and pressure drop at refrigerant boiling in the plate coils
- Heat and hydrodynamic calculation of tube-in-tube heat-exchanger
- Centrifugal compression stage performance with fluorocarbon refrigerants of different conditional isentropic exponents
- Heat load calculation for the modules of combined type freezing units
- New methods of forecasting flow regimes for boiling refrigerant in macro- and minichannels
- Rankine cycle working fluid for the use of regasification cold
- Basis approximating functions selection to maximize heat transfer coefficient of water-propylene glycol electrolyte coolant